Simulation and optimization of energy consumption in cold storage chambers from the horticultural industry

被引：9

作者：

Brito P. ^{[1
]}

Lopes P. ^{[1
]}

Reis P. ^{[1
]}

Alves O. ^{[1
]}

机构：

[1] C3i-Coordenação Interdisciplinar para a Investigação e Inovaçao, Instituto Politécnico de Portalegre, 7301-901 Portalegre, Lugar da Abadessa

来源：

International Journal of Energy and Environmental Engineering | 2014年 / 5卷 / 2-3期

关键词：

Cold storage chamber; Energy efficiency; Horticultural industry; Simulation;

D O I：

10.1007/s40095-014-0088-2

中图分类号：

学科分类号：

摘要：

The use of industrial cooling for food preservation has been revealed to be an efficient and widely employed technique, from harvest time to final consumption by the customer. However, the most used method to generate that cold (based on the compression refrigeration cycle) requires a considerable amount of electric energy, especially if no appropriate energy efficiency measures are implemented in cold storage chambers. This fact contributes to the increased costs in electricity bills, reduction of competitiveness among companies and also to a negative impact in terms of global warming. To help companies define and implement the right efficiency measures for cold production, this work aims to develop a methodology for simulation and optimization of energy consumption in cold chambers by improving both constructive and operating parameters (external temperature, enclosure insulation, door opening time, etc.), which contribute to the infiltration of heat energy. It is also intended that this methodology determines which of those parameters have greater influence in energy consumptions, as well as to estimate possible savings resulting from the optimization process. Results obtained in a garlic cold chamber showed that it is possible to achieve energy savings of up to 40 % for an initial investment around 1,500 € in efficiency measures and a payback time among 2 and 5 years. On the other hand, parameters that had the greatest influence in energy consumptions were those directly related with thermal insulation of enclosures and entry of warm air within. Total contribution of these two parameters in the global consumption was about 95 %. © 2014 The Author(s).

引用

页码：1 / 15

页数：14

共 24 条

[1]

Moran M.J., Shapiro H.N., Fundamentals of Engineering Thermodynamics, (1993)

[2]

Joppen L., Energy efficiency: The challenges ahead-no significant improvements in three decades, Food. Eng. Ingred, 30, 6, pp. 24-27, (2005)

[3]

Abdelaziz E.A., Saidur R., Mekhilef S., A review on energy saving strategies in industrial sector, Renew. Sustain. Energy Rev., 15, pp. 150-168, (2011)

[4]

Dempsey P., Bansal P., The art of air blast freezing: design and efficiency considerations, Appl Therm Eng, 41, pp. 71-83, (2012)

[5]

Gaspar P.D., Miranda A., Pitarma R.A., Estudo comparativo do desempenho de códigos de DFC na modelação de equipamentos de refrigeração abertos, Paper Presented At the VII Congress On Computational and Applied Mechanics, University of Évora, Évora, 14-16 April, (2003)

[6]

Gupta J.K., Ram Gopal M., Chakraborty S., Modeling of a domestic frost-free refrigerator, Int. J. Refrig, 30, pp. 311-322, (2007)

[7]

Eames I.W., Brown T., Evans J.A., Maidment G.G., Description and validation of a computer based refrigeration system simulator, Comput. Elect. Agric., 85, pp. 53-63, (2012)

[8]

Koury R.N.N., Machado L., Ismail K.A.R., Numerical simulation of a variable speed refrigeration system, Int. J. Refrig, 24, pp. 192-200, (2001)

[9]

Ding G., Recent developments in simulation techniques for vapour-compression refrigeration systems, Int. J. Refrig, 30, pp. 1119-1133, (2007)

[10]

Borges B.N., Hermes C.J.L., Goncalves J.M., Melo C., Transient simulation of household refrigerators: a semi-empirical quasi-steady approach, Appl. Energy, 88, pp. 748-754, (2011)

← 1 2 3 →