Buckling of steel cylindrical shells with an elliptical cutout

被引：0
作者：
Mahmoud Shariati
Masoud Mahdizadeh Rokhi
机构：
[1] Shahrood University of Technology,Department of Mechanical Engineering
来源：
International Journal of Steel Structures | 2010年 / 10卷
关键词：
cylindrical shells; elliptical cutout; buckling; FEM; experimental analysis;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Numerical simulation and analysis of steel cylindrical shells with various diameter and length having an elliptical cutout, subjected to axial compression were systematically carried out in this paper. The investigation examined the influence of the cutout size, cutout angle and the shell aspect ratios L/D and D/t on the pre-buckling, buckling, and post-buckling responses of the cylindrical shells. For several specimens, an experimental investigation was also carried out via an INSTRON 8802 servo hydraulic machine and the results obtained from the experiments were compared with numerical results. A very good accordance was observed between the results obtained from the finite element simulation and the experiments. Furthermore, some equations in the form of a buckling load reduction factor were developed.
引用
收藏
页码：193 / 205
页数：12
相关论文
共 63 条
[1]  
Almorth B. O.(1973)Stability analysis of cylinders with circular cutouts American Institute of Aeronautics and Astronautics Journals 11 1582-1584
[2]  
Brogan F. A.(1972)Asymptotic formulas for the buckling stress of axially compressed cylinders with localized or random axisymmetric imperfections Journal of Applied Mechanics 39 179-184
[3]  
Marlowe M. B.(1991)Collapse of axially compressed cylindrical shells with random imperfections American Institute of Aeronautics and Astronautics Journals 29 2247-2256
[4]  
Amazigo J. C.(2010)Buckling of axially compressed cylinders with imperfect length Computers & Structures 88 365-374
[5]  
Budiansky B.(2005)Numerical Analysis of Cold-Formed Steel Members International Journal of Steel Structures 5 63-78
[6]  
Arbocz J.(2006)Numerical and experimental investigations of the response of aluminum cylinders with a cutout subject to axial compression Thin-Walled Structures 44 254-270
[7]  
Ho J. M. A. M.(1998)Effect of openings on the buckling of cylindrical shells subjected to axial compression Thin-Walled Structures 31 187-202
[8]  
Blachut J.(1991)Axial load compatibility of cylindrical shells with local geometric defects Experimental Mechanics 31 104-110
[9]  
Camotim D.(2003)Local Buckling of Thin-Walled Stainless Steel Members International Journal of Steel Structures 3 191-201
[10]  
Silvestre N.(2009)Buckling and Post Buckling of Thin-walled Composite Columns with Intermediate-stiffened Open Cross-section under Axial Compression International Journal of Steel Structures 9 175-184
1234567