Parametric study on the performance of solar air heater equipped with louvered fins

被引:0
作者
Subhash Chand
Prabha Chand
机构
[1] National Institute of Technology,Department of Mechanical Engineering
来源
Journal of Mechanical Science and Technology | 2018年 / 32卷
关键词
Solar air heater; Louvered fin; Thermal efficiency; Thermohydraulic efficiency;
D O I
暂无
中图分类号
学科分类号
摘要
A theoretical model is developed in this study to investigate the performance of solar air collector equipped with louvered fins. Parameters, such as mass flow rate, fin spacing, louvered pitch ratio (w/Lp), and louvered angle, are considered. The governing equations are solved using a computer code that employs an iterative solution procedure, and the obtained results are compared with that using plain solar air heater. The thermal efficiency of the plain solar air heater is enhanced from 43.14 % to 76.79 % by employing louvered fins with fin spacing values of 5 and 1 cm at a constant mass flow rate of 0.020 kg/s. However, the pressure drop effect becomes dominant that decreases the effective efficiency by 9.4 % at a high mass flow rate of 0.083 kg/s.
引用
收藏
页码:3965 / 3973
页数:8
相关论文
共 49 条
[1]  
Yeh H. M.(2009)Effect of external recycle on the performances of flat-plate solar air heaters with internal fins attached Renewable Energy 34 1340-1347
[2]  
Ho C. D.(2012)Upward-type flat-plate solar air heaters attached with fins and operated by an internal recycling for improved performance Journal of the Taiwan Institute of Chemical Engineers 43 235-240
[3]  
Yeh H. M.(2006)Performance investigation of flat plate v-corrugated and finned air collectors, Energy 31 452-470
[4]  
Karim M. A.(2016)Numerical studies on the effect of delta-shaped obstacles’ spacing on the heat transfer and pressure drop in v-corrugated channel of solar air heater Solar Energy 131 47-60
[5]  
Hawlader M. N. A.(2014)Experimental study of heat transfer and thermal performance with longitudinal fins of solar air heater Journal of Advanced Research 5 183-192
[6]  
Handoyo E. A.(2014)Exergetic performance evaluation of a single pass baffled solar air heater Energy 64 697-706
[7]  
Ichsani D.(2013)Analytical and experimental study of recycling baffled double-pass solar air heaters with attached fins Energies 6 1821-1842
[8]  
Chabane F.(2017)A parametric study of the 2D model of solar air heater with elliptical rib roughness using CFD Journal of Mechanical Science and Technology 31 959-964
[9]  
Moummi N.(2017)Artificial bee colony algorithm for thermohydraulic optimization of flat plate solar air heaters Journal of Mechanical Science and Technology 31 3593-3602
[10]  
Benramache S.(1991)How structure in the louvered fin heat exchanger geometry Experimental Thermal and Fluid Science 4 205-217