共 51 条
[1]
Rahim TNAT(2019)Recent developments in fused deposition modeling-based 3D printing of polymers and their composites Polym Rev 59 589-624
[2]
Abdullah AM(2019)The impact of defects on tensile properties of 3D printed parts manufactured by fused filament fabrication Mater Today Commun 18 140-148
[3]
Md Akil H(2020)Post-Process Effects of Isothermal Annealing and Initially Applied Static Uniaxial Loading on the Ultimate Tensile Strength of Fused Filament Fabrication Parts Materials 13 352-30
[4]
Fayazbakhsh K(2018)Single-layer temperature-adjusting transition method to improve the bond strength of 3D-printed PCL/PLA parts Compos A Appl Sci Manuf 115 22-466
[5]
Movahedi M(2018)Effect of initial filament moisture content on the microstructure and mechanical performance of ULTEM® 9085 3D printed parts Addit Manuf 24 457-47
[6]
Kalman J(2017)Tensile strength of commercial polymer materials for fused filament fabrication 3D printing Addit Manuf 15 40-753
[7]
Rane R(2016)Influence of inter-layer cooling time on the quasi-static properties of ABS components produced via fused deposition modelling Procedia Cirp 42 748-248
[8]
Kulkarni A(2018)The effect of interlayer cooling on the mechanical properties of components printed via fused deposition Addit Manuf 24 243-108
[9]
Prajapati H(2020)Relation Between Mechanical Properties and 3D Printer Configurations Parameters Using PLA at Open-Source Prusa I3 Int J Integr Eng 12 97-380
[10]
Taylor R(2018)Strength of PLA components fabricated with fused deposition technology using a desktop 3D printer as a function of geometrical parameters of the process Polymers 10 313-undefined