Development of a master plan for industrial solid waste management

被引：10
作者：
Karamouz M. [1 ]
Zahraie B. [1 ]
Kerachian R. [1 ]
Mahjouri N. [2 ]
Moridi A. [3 ]
机构：
[1] Center of Excellence in Infrastructure Engineering and Management, School of Civil Engineering, University of Tehran, Tehran
[2] School of Environmental Engineering, University of Tehran, Tehran
[3] School of Civil and Environmental Engineering, Amirkabir University, Tehran
来源：
International Journal of Environmental Science & Technology | 2006年 / 3卷 / 3期
关键词：
Analytical hierarchy process; Industrial solid waste management; Multiple criteria decision making;
D O I：
10.1007/BF03325930
中图分类号：
学科分类号：
摘要：
Rapid industrial growth in the province of Khuzestan in the south west of Iran has resulted in disposal of about 1750 tons of solid waste per day. Most of these industrial solid wastes including hazardous wastes are disposed without considering environmental issues. This has contributed considerably to the pollution of the environment. This paper introduces a framework in which to develop a master plan for industrial solid waste management. There are usually different criteria for evaluating the existing solid waste pollution loads and how effective the management schemes are. A multiple criteria decision making technique, namely Analytical Hierarchy Process (AHP), is used for ranking the industrial units based on their share in solid waste related environmental pollution and determining the share of each unit in total solid waste pollution load. In this framework, a comprehensive set of direct, indirect, and supporting projects are proposed for solid waste pollution control. The proposed framework is applied for industrial solid waste management in the province of Khuzestan in Iran and a databank including GIS based maps of the study area is also developed. The results have shown that the industries located near the capital city of the province, Ahwaz, produce more than 32 percent of the total solid waste pollution load of the province. Application of the methodology also has shown that it can be effectively used for development of the master plan and management of industrial solid wastes. © Summer 2006, IRSEN, CEERS, IAU.
引用
收藏
页码：229 / 242
页数：13
相关论文
共 13 条
  • [1] Aczel J., Saaty T., Procedure for synthesizing ratio judgments, J. Math. Psyco., 27, pp. 93-102, (1983)
  • [2] Hogland W., Stenis J., Assessment and system analysis of industrial waste management, Waste Manag., 2, 7, pp. 537-543, (2000)
  • [3] Karamouz M., Zahraie B., Kerachian R., Development of a master plan for water pollution control using MCDM techniques: A case study, J. Wat. Int., 28, 4, pp. 478-490, (2003)
  • [4] Karamouz M., Development of a Master Plan for Pollution Control of Karoon River in Iran, (2002)
  • [5] Karamouz M., Identification and Classification of the Solid Wastes of Large Industries in the Province of Khuzestan, Iran, (2003)
  • [6] Karamouz M., Zahraie B., Kerachian R., Jaafarzadeh N., Mahjuri N., Developing amaster plan for hospital solid waste management: Acase study, Waste Manag., 26, (2006)
  • [7] Morrissey J., Browne J., Waste management models and their application to sustainable waste management, Waste Manag., 24, 3, pp. 297-308, (2004)
  • [8] Pomerol J.C., Barba-Romero S., Multicriterion Decision in Management: Principles and Practice, (2000)
  • [9] Roberge H.D., Baetz B.W., Optimization modeling for industrial waste reduction planning, Waste Manag., 14, 1, pp. 35-48, (1994)
  • [10] Raleigh L.H., Knox R.C., Canter L.W., Proposed non-hazardous industrial-waste classification scheme, J. Environ. Eng., ASCE, 121, 5, pp. 402-410, (1995)
12