Effect of cutting tool geometry on hole quality in orbital drilling

被引：0
|
作者：
Pierre-André Rey
Johanna Senatore
Yann Landon
机构：
[1] Institut de mécanique et d’ingénierie,
[2] CNRS UMR 5295,undefined
[3] Arts et Métiers ParisTech - Campus de Bordeaux,undefined
[4] Esp. des Arts et Métiers,undefined
[5] Institut Clément Ader,undefined
[6] CNRS UMR 5312,undefined
[7] Université Paul Sabatier,undefined
[8] 3 rue Caroline Aigle,undefined
来源：
The International Journal of Advanced Manufacturing Technology | 2024年 / 131卷
关键词：
Orbital drilling; 3D chip geometry simulation; Tool geometry optimization;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The orbital drilling process is a very complex machining operation. Due to the helical path of the tool in the material and the tool geometry that can be very complex, the geometry of the chip is very variable along the cutting edge and during a revolution of the tool. This complexity leads to variable cutting forces during drilling and makes it difficult to model and estimate for different tool geometries.
引用
收藏
页码：827 / 841
页数：14
相关论文
共 50 条
  • [1] Effect of cutting tool geometry on hole quality in orbital drilling
    Rey, Pierre-Andre
    Senatore, Johanna
    Landon, Yann
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 131 (02): : 827 - 841
  • [2] The Effect of Cutting Paramaters on The Hole Quality and Tool Wear During The Drilling of Inconel 718
    Kivak, Turgay
    Habali, Kasim
    Seker, Ulvi
    GAZI UNIVERSITY JOURNAL OF SCIENCE, 2012, 25 (02): : 533 - 540
  • [3] Effect of machining parameters and cutting tool coating on hole quality in dry drilling of fibre metal laminates
    Giasin, K.
    Gorey, G.
    Byrne, C.
    Sinke, J.
    Brousseau, E.
    COMPOSITE STRUCTURES, 2019, 212 : 159 - 174
  • [4] Influence of cutting parameters on tool wear and hole quality in composite aerospace components drilling
    Fernandez-Perez, J.
    Cantero, J. L.
    Diaz-Alvarez, J.
    Miguelez, M. H.
    COMPOSITE STRUCTURES, 2017, 178 : 157 - 161
  • [5] Effect of cutting edge geometry change due to tool wear on hole quality in drilling of carbon fiber reinforced plastics using advanced ceramic coated tools
    Bin Abdullah, Mohammad Sayem
    Kim, Dave
    Kwon, Patrick
    Kim, Tae-Gon
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, 236 (01) : 302 - 317
  • [6] Effect of Cutting Parameters on the Hole Quality in Dry Drilling of Some Thermoplastic Polymers
    Susac, Florin
    Tabacaru, Valentin
    Teodor, Virgil Gabriel
    Baroiu, Nicusor
    MATERIALE PLASTICE, 2019, 56 (01) : 245 - 251
  • [7] Fundamental Experiment of Near-Dry Deep Hole Drilling with BTA Tool -The optimal cutting conditions and tool's geometry
    Nagata, Fukuhito
    Akashi, Koji
    Ishibashi, Daisaku
    EMERGING TECHNOLOGY IN PRECISION ENGINEERING XIV, 2012, 523-524 : 109 - +
  • [8] Effect of cooling methods on cutting temperature, cutting force and hole quality in drilling of three ferrous alloys
    Islam, M. N.
    Boswell, B.
    INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME2018), 2019, 1150
  • [9] Effect of Microstructure Cutting Edge Tool on CFRP Hole Making Quality
    Jiang, Xiaonan
    Zhu, Pingyu
    Wang, Shuaibin
    Soto, Marcelo A.
    PROCEEDINGS OF 2021 7TH INTERNATIONAL CONFERENCE ON CONDITION MONITORING OF MACHINERY IN NON-STATIONARY OPERATIONS (CMMNO), 2021, : 141 - 144
  • [10] Effect of Tool Geometry in Nanometric Cutting
    HAN Xue-song
    厦门大学学报(自然科学版), 2002, (S1) : 16 - 17
12345