Environmental scanning electron microscopy (ESEM)—a versatile tool in studying plants

Environmental scanning electron microscopy (ESEM) enables the investigation of hydrated and uncoated plant samples and the in situ observation of dynamic processes. Water vapor in the microscope chamber takes part in secondary electron detection and charge prevention. Two ESEM modes are available and offer a broad spectrum of applications. The environmental or wet mode prevents sample dehydration by the combination of sample cooling (5°C) and a vapor pressure of 4–6 Torr. In the low vacuum mode, the maximum chamber pressure is limited to 1 Torr (corresponding to about 5% relative humidity in the chamber) and allows the simultaneous use of a backscattered electron detector for imaging material contrast. A selection of characteristic plant samples and various applications are presented as a guide to ESEM for plant scientists. Leaf surfaces, trichomes, epicuticular waxes, and inorganic surface layers represent samples being comparatively resistant to dehydration, whereas callus cells and stigmatic tissue are examples for dehydration- and beam-sensitive samples. The potential of investigating dynamic processes in situ is demonstrated by studying anther opening, by tensile testing of leaves, and by performing hydration/dehydration experiments by changing the vapor pressure. Additionally, automated block-face imaging and serial sectioning using in situ ultramicrotomy is presented. The strengths and weaknesses of ESEM are discussed and it is shown that ESEM is a versatile tool in plant science.