Research on the Surrounding Rock Control Technology of Gob-Side Entry with a Narrow Coal Pillar Reserved in a Fully Mechanized Caving Face with Large Mining Height

被引：0
作者：
Yi Wang
Yingming Li
Zhonglin Yu
Hao Zhang
Dan Ding
机构：
[1] Anhui University of Science and Technology,State Key Laboratory of Mining Response and Disaster Prevention and Control in Deep Coal Mines
[2] Anhui University of Science and Technology,School of Mining Engineering
来源：
Geotechnical and Geological Engineering | 2022年 / 40卷
关键词：
Gob-side entry in high mining height; Main roof fracture line; Narrow coal pillar; Surrounding rock control technology; FLAC; numerical simulation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
II946 working face of Luling Coal Mine in Huaibei Coal Industruy Group was taken as research background to study the problems of roadway driven in stable coal bodies along the gob with a narrow pillar reserved. The position of the main roof fracture line in the gob was calculated through theory. The coal pillar mechanics model under the condition of large mining height was established and used to calculate the theoretical width of the narrow coal pillar. The side abutment pressure of the gob and the stress distribution and deformation characteristics of the narrow coal pillar of different widths were studied through FLAC3D numerical calculation and the reasonable width of the narrow coal pillar was obtained as 4 m. The deformation characteristics and failure laws of the surrounding rock of the gob-side entry in a fully mechanized caving face with large mining height were analyzed, and the support scheme was designed for the gob-side entry in large mining height. The stress and deformation laws of the surrounding rock and supporting structure of gob-side entry were analyzed by FLAC3D numerical simulation. Lastly the support results showed that the support scheme was reasonable and can ensure the stability of roadway.
引用
收藏
页码：285 / 300
页数：15
相关论文
共 38 条
  • [1] Di S(2017)Theoretical study on roof movement and abutment pressure distribution of longwall panel with 85 m mining height J China Coal Soc 42 2254-2261
  • [2] Wang JR(2014)Width of narrow coal pillar of roadway driving along goaf at large height mining face in deep mine J Min Safety Eng 31 580-586
  • [3] Song GJ(2016)Experimental research on catastrophic mechanism of overburden strata with high excavation height in high tectonic stress zone J Min Safety Eng 33 1058-1064
  • [4] Feng JC(2017)Roof structure analysis on large mining height longwall face in shallow coal seam J Min Safety Eng 34 282-286
  • [5] Ma NJ(2018)Study of coal face failure mechanism of a large-cutting-height mining face Chin J Rock Mechan Eng 37 3458-3469
  • [6] Zhao ZQ(2012)Reasonable position and control technology of gob side entry driving in fully mechanized top coal caving J China Coal Soc 37 1564-1569
  • [7] Guo WB(2018)Asymmetric load and instability characteristics of coal wall at large mining height fully-mechanized face in steeply dipping seam J China Coal Soc 43 1829-1836
  • [8] Yu XY(2017)Reasonable width of narrow coal pillar of gob-side entry driving in large mining height IOP Conf 59 012025-745
  • [9] Zhao BC(2019)Multiple influence factor sensitivity analysis on coal wall spalling of workface with large mining height J Min Safety Eng 36 736-100
  • [10] Lei WL(2019)Overlying strata structural modeling and support applicability analysis for large mining-height stopes J Loss Prev Process Ind 57 94-913
1234