Structure and mechanical properties of iron subjected to surface severe plastic deformation by attrition: II. Mechanical properties of nano- and submicrocrystalline iron

被引：8

作者：

Yurkova A.I. ^{[1
,2
]}

Milman Y.V. ^{[2
]}

Byakova A.V. ^{[1
,2
]}

机构：

[1] Kiev Polytechnical Institute, National Technical University of Ukraine, Kiev 03056

[2] Institute of Problems of Materials Science, National Academy of Sciences of Ukraine

来源：

Russian Metallurgy (Metally) | 2010年 / 2010卷 / 4期

关键词：

Severe Plastic Deformation; RUSSIAN Metallurgy; Triple Junction; Grain Boundary Slide; Armco Iron;

D O I：

10.1134/S0036029510040026

中图分类号：

学科分类号：

摘要：

Depth-sensing indentation is used to study the effect of grain refinement to submicro- and nanograins on the mechanical properties (hardness, plasticity, Young's modulus) of armco iron subjected to severe plastic deformation by attrition in argon. In contrast to fcc metals, where the hardness increases and the plasticity decreases as the grain size decreases to 20 nm, the hardness of bcc iron decreases from 5.8 to 3.7 GPa and plasticity δA increases from 0.82 to 0.87 as the grain size decreases from 50 to 20 nm. © 2010 Pleiades Publishing, Ltd.

引用

页码：258 / 263

页数：5

共 50 条

[41] Mechanical behaviour of nanostructured iron fabricated by severe plastic deformation under diffusion flow of nitrogen
Yurkova, AI
Byakova, AV
Belots'ky, AV
Milman, YV
Dub, SN
NANOMATERIALS BY SEVERE PLASTIC DEFORMATION, 2006, 503-504 : 645 - 650
[42] Structure and mechanical properties of a Zr-1Nb alloy, obtained by the method of severe plastic deformation
Stepanova, E. N.
Grabovetskaya, G. P.
Mishin, I. P.
Bulinko, D. Yu.
MATERIALS TODAY-PROCEEDINGS, 2015, 2 (01) : 365 - 369
[43] Effect of Severe Plastic Deformation on the Mechanical Properties of Al6061 Alloy
Mishra, Vagish D.
Palaniappan, Karthik
Rao, Balkrishna C.
Murthy, H.
TMS 2020 149TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2020, : 2113 - 2116
[44] Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation
Yamashita, A
Horita, Z
Langdon, TG
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 300 (1-2): : 142 - 147
[45] Effect of severe plastic deformation on mechanical properties and microstructure in 7075 aluminum alloy
Kuramoto, Shigeru
Horibuchi, Kayo
Aoi, Ichiro
Oh-Ishi, Keiichiro
Keikinzoku/Journal of Japan Institute of Light Metals, 2014, 64 (06): : 241 - 248
[46] Effect of heat treatment on the structural and phase transformations and mechanical properties of TiNi alloy subjected to severe plastic deformation by torsion
N. N. Kuranova
D. V. Gunderov
A. N. Uksusnikov
A. V. Luk’yanov
L. I. Yurchenko
E. A. Prokof’ev
V. G. Pushin
R. Z. Valiev
The Physics of Metals and Metallography, 2009, 108 : 556 - 568
[47] A study on microstructure development and mechanical properties of pure copper subjected to severe plastic deformation by the ECAP-Conform process
Atefi, S.
Parsa, M. H.
Ahmadkhaniha, D.
Zanella, C.
Jafarian, H. R.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 21 : 1614 - 1629
[48] Tensile properties of a nickel-base alloy subjected to surface severe plastic deformation
Tian, J. W.
Dai, K.
Villegas, J. C.
Shaw, L.
Liaw, P. K.
Klarstrom, D. L.
Ortiz, A. L.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 493 (1-2): : 176 - 183
[49] Microstructural Characterization and Mechanical Properties of Cast Al-15Zn-2Mg Alloy Subjected to Severe Plastic Deformation
Manjunath, G. K.
Bhat, K. Udaya
Kumar, G. V. Preetham
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 17674 - 17681
[50] Microstructures and mechanical properties of ultrafine grained pure Ti produced by severe plastic deformation
Chang-Young Hyun
Jong-Hyun Lee
Ho-Kyung Kim
Research on Chemical Intermediates, 2010, 36 : 629 - 638

← 1 2 3 4 5 →