Effect of moisture on the adhesion of CFRP-to-steel bonded joints using peel tests

被引：0
作者：
M. M. Arouche
S. Budhe
L. A. Alves
S. Teixeira de Freitas
M. D. Banea
S. de Barros
机构：
[1] CEFET/RJ,Institut de Recherche en Génie Civil et Mécanique
[2] Federal Center of Technological Education,undefined
[3] Delft University of Technology,undefined
[4] Université de Nantes,undefined
来源：
Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2018年 / 40卷
关键词：
Adhesively bonded joints; Peel tests; Moisture; CFRP; Salt water;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this work, an experimental study has been carried out to evaluate the effect of salt water condition on the long-term adhesion of composite-to-metal bonded joints using peel tests. A new test configuration is tested via fully and partially immersed specimens with 500 mm length. Fracture surfaces of non-aged samples exhibited a cohesive failure within the adhesive layer, which indicates a good adhesion of the joint. Results revealed a significant difference in the interface adhesion between aged and non-aged condition after 150 days of immersion. Partially immersed specimens allow to evaluate the adhesion performance of the joint under dry and wet condition in single specimen using a simple peel test.
引用
收藏
相关论文
共 50 条
  • [41] Co-Curing of CFRP-Steel Hybrid Joints Using the Vacuum Assisted Resin Infusion Process
    Streitferdt, Alexander
    Rudolph, Natalie
    Taha, Iman
    [J]. APPLIED COMPOSITE MATERIALS, 2017, 24 (05) : 1137 - 1149
  • [42] Experimental and numerical investigation of the residual strength of steel-composites bonded joints: Effect of media and aging condition
    Sugiman, Sugiman
    Setyawan, Paryanto Dwi
    Salman, Salman
    Ahmad, Hilton
    [J]. COMPOSITES PART B-ENGINEERING, 2019, 173
  • [43] Measurement of longitudinal strain and estimation of peel stress in adhesive-bonded single-lap joint of CFRP adherend using embedded FBG sensor
    Ning, X.
    Murayama, H.
    Kageyama, K.
    Uzawa, K.
    Wada, D.
    [J]. SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2012, PTS 1 AND 2, 2012, 8345
  • [44] High performance and cost-effective hybrid steel/CFRP joints using bi-adhesive technique for the repair of metallic infrastructures
    Mohabeddine, Anis
    Malik, Ghassan
    Correia, Jose
    De Jesus, Abilio
    Fantuzzi, Nicholas
    Castro, Jose Miguel
    [J]. COMPOSITE STRUCTURES, 2023, 321
  • [45] Effect of bond enhancement using carbon nanotubes on flexural behavior of RC beams strengthened with externally bonded CFRP sheets
    IRSHIDAT Mohammad R.
    AL-HUSBAN Rami S.
    [J]. Frontiers of Structural and Civil Engineering, 2022, 16 (01) : 131 - 143
  • [46] Effect of bond enhancement using carbon nanotubes on flexural behavior of RC beams strengthened with externally bonded CFRP sheets
    Irshidat, Mohammad R.
    Al-Husban, Rami S.
    [J]. FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING, 2022, 16 (01) : 131 - 143
  • [47] Effect of bond enhancement using carbon nanotubes on flexural behavior of RC beams strengthened with externally bonded CFRP sheets
    Mohammad R. Irshidat
    Rami S. Al-Husban
    [J]. Frontiers of Structural and Civil Engineering, 2022, 16 : 131 - 143
  • [48] Formability, defects and strengthening effect of steel/CFRP structures fabricated by using the differential temperature forming process
    Guo, Yuqin
    Zhai, Changpan
    Li, Fuzhu
    Zhu, Xinfeng
    Xu, Fan
    Wu, Xuelian
    [J]. COMPOSITE STRUCTURES, 2019, 216 : 32 - 38
  • [49] Predicting the effect of adherend dimensions on the strength of adhesively bonded joints using M5P and M5 classifiers
    Ayaz, Yasar
    [J]. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2020, 42 (09)
  • [50] Predicting the effect of adherend dimensions on the strength of adhesively bonded joints using M5P and M5 classifiers
    Yaşar Ayaz
    [J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020, 42
12345