Effects of Ni addition on mechanical properties of TiB2/SiC composites prepared by reactive hot pressing (RHP)

被引：0
作者：
G. J ZHANG
Z. Z JIN
X. M YUE
机构：
[1] China Building Materials Academy,Advanced Ceramics Institute
来源：
Journal of Materials Science | 1997年 / 32卷
关键词：
Residual Stress; Fracture Toughness; Vickers Hardness; Fracture Strength; Residual Stress Measurement;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Effects of Ni addition on the mechanical properties of TiB2/SiC composites produced by RHP according to the chemical reaction Si+2TiH2+B4C→2TiB2+SiC+2H2↑ have been investigated. The fracture strength and Vickers hardness reach their highest values at 2 wt % Ni content, but the fracture toughness reaches its lowest value at this Ni content. Suitable Ni content can enhance the boundary strength of the composites and it is supported by SEM observation and residual stress measurement by XRD technique. On the other hand, the results of the residual stress measurement show that the residual machining stresses in the surface layer of the specimens are not constant but change with different directions.
引用
收藏
页码：2093 / 2097
页数：4
相关论文
共 50 条
[31]   Mechanical properties of hot-pressed Al2O3/SiC composites [J].
Shi, X. L. ;
Xu, F. M. ;
Zhang, Z. J. ;
Dong, Y. L. ;
Tan, Y. ;
Wang, L. ;
Yang, J. M. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (18-19) :4646-4649
[32]   Analysis of Mechanical Properties of TiB2-TiC+Ni/TiAl/Ti Graded Materials Prepared by FAPAS [J].
Liu, Z. F. ;
Meng, Q. S. ;
Chen, S. P. ;
Liang, L. J. ;
Xue, P. F. .
MATERIALS MODELING, SIMULATION, AND CHARACTERIZATION, 2011, 689 :33-+
[33]   Study on the microstructure and mechanical properties of selective laser melted TiB/Ti6Al4V composites incorporating trace amounts of TiB2 nanoparticles [J].
Fu, Shuting ;
Han, Ying ;
Sun, Jiapeng ;
Qiu, Feng ;
Zu, Guoqing ;
Zhu, Weiwei ;
Ran, Xu .
JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1013
[34]   Enhancing the mechanical properties of high Nb-TiAl composites by addition of nano-Y2O3 via induction hot-pressing sintering [J].
Guo, Yingchao ;
Liang, Yongfeng ;
Lin, Junpin .
INTERMETALLICS, 2023, 159
[35]   Development of AA2024/TiB2 + Y2O3 Hybrid Composites with Improved Mechanical Properties Through Stir Rheocasting [J].
Semegn Cheneke ;
D. Benny Karunakar .
Arabian Journal for Science and Engineering, 2020, 45 :1155-1171
[36]   Development of AA2024/TiB2 + Y2O3 Hybrid Composites with Improved Mechanical Properties Through Stir Rheocasting [J].
Cheneke, Semegn ;
Karunakar, D. Benny .
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2020, 45 (02) :1155-1171
[37]   Microstructure and mechanical properties of B4C-TiB2 ceramic composites hot pressed with in-situ reaction [J].
Svec, P. ;
Gabrisova, Z. ;
Brusilova, A. .
JOURNAL OF CERAMIC PROCESSING RESEARCH, 2019, 20 (01) :113-120
[38]   Effects of residual stress and intragranular particles on mechanical properties of hot-pressed Al2O3/SiC ceramic composites [J].
Chai, Jianlong ;
Zhu, Yabin ;
Gao, Xing ;
Shen, Tielong ;
Niu, Lijuan ;
Li, Shufen ;
Jin, Peng ;
Cui, Minghuan ;
Wang, Zhiguang .
CERAMICS INTERNATIONAL, 2022, 48 (16) :23258-23265
[39]   Tailoring the microstructure and properties of AA6061-T6/TiB2 cast composites with the addition of rare earth La2O3 nanoparticles [J].
Singh, Vibhu ;
Murtaza, Qasim ;
Niranjan, M. S. .
COMPOSITES COMMUNICATIONS, 2025, 53
[40]   Phase Formation and Physical and Mechanical Properties of Fe‒Cu–Ni‒Sn–VN Composites Sintered by Vacuum Hot Pressing for the Diamond Stone Processing Tools [J].
V. A. Mechnik ;
N. A. Bondarenko ;
T. A. Prikhna ;
V. M. Kolodnitskyi ;
V. E. Moshchil ;
V. V. Strelchuk ;
A. S. Nikolenko ;
E. S. Gevorkyan ;
V. A. Chishkala .
Journal of Superhard Materials, 2022, 44 :160-169
12345