Wear Resistance of Detonation Coatings with Amorphous Structure Under Conditions of Friction Against Nonrigidly Fixed Abrasive Particles

被引：0

作者：

I. D. Kuchumova

V. A. Bataev

B. E. Grinberg

I. S. Batraev

A. M. Jorge

机构：

[1] Novosibirsk State Technical University,Department of Materials Science and Engineering

[2] Lavrent’ev Institute of Hydrodynamics of the Siberian Branch of the Russian Academy of Sciences,undefined

[3] Construction-Technology Branch of the Lavrent’ev Institute of Hydrodynamics of the Siberian Branch of the Russian Academy of Sciences,undefined

[4] Federal University of Saö Carlos,undefined

[5] University of Grenoble Alpes,undefined

[6] University Savoie Mont Blanc,undefined

[7] CNRS,undefined

[8] Grenoble INP,undefined

[9] LEMPI,undefined

[10] Grenoble Alpes University,undefined

[11] CNRS,undefined

[12] LEPMI and SIMAP,undefined

来源：

Metal Science and Heat Treatment | 2022年 / 63卷

关键词：

knock (detonation) spraying; amorphous structure; coating; wear resistance; friction;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The possibility of forming coatings with a high content of amorphous phase by knock (detonation) spraying of a powder of alloy Fe66Cr10Nb5B19 of fraction 45 – 75 μm is considered. Results of comparative tests of the coatings and of a stainless steel check test piece for abrasive wear under friction against nonrigidly fixed abrasive particles conducted according to ASTM G65D are presented. The wear mechanisms of the knock-sprayed coatings with partially crystallized structure are studied.

引用

页码：463 / 469

页数：6

共 50 条

[1] Wear Resistance of Detonation Coatings with Amorphous Structure Under Conditions of Friction Against Nonrigidly Fixed Abrasive Particles
Kuchumova, I. D.
Bataev, V. A.
Grinberg, B. E.
Batraev, I. S.
Jorge, A. M., Jr.
METAL SCIENCE AND HEAT TREATMENT, 2022, 63 (9-10) : 463 - 469
[2] Determination of Steel Wear Resistance under the Conditions of Friction Against an Abrasive.
Sorokin, G.M.
Milancheva, N.V.
Izvestia vyssih ucebnyh zavedenij. Neft i gaz, 1981, (03): : 75 - 77
[3] Predicting the wear resistance of powder materials and coatings under abrasive erosion conditions
Kulu, P.A.
Soviet Journal of Friction and Wear (English translation of Trenie i Iznos), 1988, 9 (05): : 118 - 123
[4] EFFECT OF TEST PARAMETERS ON ABRASION RESISTANCE OF COATINGS UNDER ABRASIVE WEAR CONDITIONS
Mital, Gerhard
Jezny, Tomas
Spisak, Emil
MM SCIENCE JOURNAL, 2024, 2024 : 8070 - 8075
[5] WEAR RESISTANCE OF HARDFACINGS UNDER ABRASIVE WEAR CONDITIONS
PETROV, IV
GRINBERG.NA
WELDING PRODUCTION, 1968, 15 (02): : 53 - &
[6] WEAR RESISTANCE OF CARBON-STEELS IN ABRASIVE FRICTION CONDITIONS
ZHIGAYEV, VD
RUSSIAN ENGINEERING JOURNAL-USSR, 1972, 52 (05): : 20 - &
[7] Wear Resistance of Plasma-Sprayed Coatings in Intensive Abrasive Wear Conditions
A.P. Umanskii
A.E. Terentiev
V.P. Brazhevsky
A.A. Chernyshov
V.F. Labunets
O.V. Radko
I.M. Zakiev
Powder Metallurgy and Metal Ceramics, 2020, 58 : 559 - 566
[8] Wear Resistance of Plasma-Sprayed Coatings in Intensive Abrasive Wear Conditions
Umanskii, A. P.
Terentiev, A. E.
Brazhevsky, V. P.
Chernyshov, A. A.
Labunets, V. F.
Radko, O. V.
Zakiev, I. M.
POWDER METALLURGY AND METAL CERAMICS, 2020, 58 (9-10) : 559 - 566
[9] Abrasive wear by TiO2 particles on hard and on low friction coatings
Van Acker, K
Vercammen, K
WEAR, 2004, 256 (3-4) : 353 - 361
[10] MODEL FOR WEAR OF BRITTLE SOLIDS UNDER FIXED ABRASIVE CONDITIONS
LAWN, BR
WEAR, 1975, 33 (02) : 369 - 372

← 1 2 3 4 5 →