A 2D CFD simulation of MR polishing medium in magnetic field-assisted finishing process using electromagnet

被引：0
作者：
Manas Das
V. K. Jain
P. S. Ghoshdastidar
机构：
[1] Indian Institute of Technology Guwahati,Department of Mechanical Engineering
[2] Indian Institute of Technology Kanpur,Department of Mechanical Engineering
来源：
The International Journal of Advanced Manufacturing Technology | 2015年 / 76卷
关键词：
MR polishing fluid; Surface finish; Electromagnet; Magnetic field-assisted finishing; CFD simulation; Super finishing;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Magnetic field-assisted finishing (MFAF) is developed for superfinishing of hard materials for both internal/external geometries with a wide range of industrial applications. This process makes use of a flexible polishing tool comprising the magnetorheological polishing (MRP) medium under varying magnetic field of an electromagnet. The relative motion between the polishing medium and the workpiece surface provides the required finishing action. The finishing performance of MFAF process depends on the axial and radial stresses generated due to the flow of magnetically stiffened MRP medium. A 2D computational fluid dynamics (CFD) simulation of MRP medium inside workpiece fixture is performed to calculate the stresses developed during polishing. The microstructure of the mixture of magnetic and abrasive particles in MRP medium is proposed in order to calculate the forces acting on an active abrasive particle. Modeling of surface finish is performed after analyzing the surface roughness profile data obtained from the surface roughness measuring instrument. They are found to agree well with the experimental results.
引用
收藏
页码：173 / 187
页数：14
相关论文
共 36 条
  • [1] Jain VK(2008)Abrasive-based nano-finishing techniques: an overview Mach Sci Technol 12 257-294
  • [2] Jiang M(1998)On chemo-mechanical polishing (CMP) of silicon nitride (Si Wear 220 59-71
  • [3] Wood NO(1988)N Manuf Eng 1 75-78
  • [4] Komanduri R(1990)) work material with various abrasives Ann CIRP 39 325-328
  • [5] Rhoades LJ(1997)Abrasive flow machining Wear 213 59-71
  • [6] Shinmura T(2004)Study on magnetic abrasive finishing Int J Mach Tools Manuf 44 1019-1029
  • [7] Takazawa K(2011)Application of Taguchi method for optimization of finishing conditions in magnetic float polishing Int J Adv Manuf Technol 62 405-420
  • [8] Hatano E(2003)Design and development of the magnetorheological abrasive flow finishing (MRAFF) process Proc Inst Mech Eng B J Eng Manuf 217 1723-1736
  • [9] Matsunaga M(2006)Nanofinishing of flat workpieces using rotational-magnetorheological abrasive flow finishing (R-MRAFF) process Wear 261 856-866
  • [10] Jiang M(2008)Finite element simulation of abrasive flow machining Int J Mach Tools Manuf 48 415-426
1234