Effect of combinations of wood and counterface materials on three-body abrasive wear

The abrasion characteristics of various combinations of wood and counterface materials in three-body abrasive wear were investigated. Various wood samples were examined in combination with wood, plastic, and metal counterface materials. The wear coefficient in the wood samples was calculated as the wear volume of the friction surface divided by the sliding distance and the applied load. The results showed that the wear coefficient was smaller in cases where the wood samples had greater yield stress. The wear coefficient increased as the yield stress of the various counterface materials increased, reaching a maximum value and then decreased as the yield stress increased. This result indicated that a peak value existed for the wear coefficient in combination with the counterface material.