Dynamic response of a box-girder bridge using the finite element technique

被引：0

作者：

Shaikh M.F. ^{[1
]}

Nallasivam K. ^{[1
]}

机构：

[1] National Institute of Technology Hamirpur, Himachal Pradesh, Hamirpur

来源：

Asian Journal of Civil Engineering | 2023年 / 24卷 / 7期

关键词：

Ballastless railway track; Box-girder bridge; Bridge modeling; Dynamic analysis; Finite element technique; Speed study;

D O I：

10.1007/s42107-023-00633-1

中图分类号：

学科分类号：

摘要：

While constructing any bridge, the dynamic performance of the structure is a very important consideration. The interaction among wheel–rail–bridge is a sophisticated phenomenon, and thus requires advanced methods to understand the dynamic response of the system. In this study, a finite element three-dimensional model of a box-girder bridge along with the railway sub-track system is developed to predict its dynamic behavior due to different combinations of the railway system. The modeling and evaluation of the bridge and sub-track systems were performed using non-closed-form finite element method-based ANSYS software. The analysis was done considering parameters like load combinations, speed of moving vehicles, and rail pad stiffness. From the analysis, the dynamic responses of the bridge in terms of total deformation, velocity, equivalent stresses and accelerations were obtained. The load case study showed the variation in responses due to different load combinations and thus, worst load combination was obtained. Speed parametric study showed that on increasing the speed the deflection of rail section increases and therefore an upper speed limit needed to be defined. Moreover, the stiffness study of the rail pad showed that there is need to select optimum stiffness to maintain balance between the rail section deflection and corrugation of material. This study will help the designers obtain relevant information for further analysis of the dynamic behavior of the bridge model. © 2023, The Author(s), under exclusive licence to Springer Nature Switzerland AG.

引用

页码：2165 / 2178

页数：13

共 24 条

[11]

Kumar P P.M., Shilpa S.B., Dynamic analysis of box girder bridges, International Research Journal of Engineering and Technology, 3, 7, pp. 1510-1513, (2016)

[12]

Mahmood M.N., Thabit Saeed Al-Ghabsha A., Dynamic analysis of bridges subjected to moving vehicle, Al-Rafidain Engineering Journal (AREJ), 14, 4, pp. 34-50, (2006)

[13]

Marjanovic M., Petronijevic M., Dynamic analysis of RC bridge: Beam versus shell deck model towards sustainable buildings, 17Th International Symposium of MASE, (2017)

[14]

Mohamad-Ali A.A., Qassim H.J., Mohamad-Ali A.A., Dynamic analysis of composite multi I-girders bridge using finite element method, IOP Conference Series: Materials Science and Engineering, (2020)

[15]

Oh S., Lee D., Shim Y., Kim H., Dynamic analysis of a wheel force for a running high-speed vehicle on railway PSC box girder bridge, Journal of Korean Society of Hazard Mitigation, 11, 4, pp. 31-39, (2011)

[16]

Salama A., Eraky A., Muhammed Y., Samir R., Dynamic analysis of high-speed railway bridges applying bridge–vehicle interaction, Jordan Journal of Civil Engineering, 16, 3, pp. 402-416, (2022)

[17]

Shen J., Zhuo J.H., Wu L., Liu X.Y., Nonlinear dynamic analysis of multi-vehicle vehicle–bridge coupling system, Journal of Physics: Conference Series, (2021)

[18]

Szafranski M., Dynamic analysis of the railway bridge span under moving loads, Roads and Bridges Drogi i Mosty, 17, 4, pp. 299-316, (2018)

[19]

Verma V., Malloth A., Nallasivam K., Modal analysis of a thin-walled box-girder bridge and railway track using finite element framework, Computational Engineering and Physical Modeling, 4, 4, pp. 64-83, (2021)

[20]

Vieira R.F., Lisi D., Virtuoso F.B., Dynamic analysis of bridge girders submitted to an eccentric moving load, Structural Engineering and Mechanics, 52, 1, pp. 173-203, (2014)

← 1 2 3 →