Fracture propagation and permeability evolution mechanism of jointed rock mass in coastal mines

被引：0
作者：
Bingqian Yan
Qingjie Qi
Jianzhong Liu
Meifeng Cai
Xiangshang Li
Peitao Wang
机构：
[1] Emergency Science Research Institute,China Coal Research Institute
[2] China Coal Research Institute,China Coal Technology and Engineering Group
[3] State Key Laboratory of Coal Mining and Clean Utilization,School of Civil and Resource Engineering
[4] China Coal Technology and Engineering Group,undefined
[5] University of Science and Technology Beijing,undefined
来源：
Rock Mechanics and Rock Engineering | 2023年 / 56卷
关键词：
NMR; Fracture propagation; Acoustic emission; Permeability coefficient; Microstructure;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
To study the fracture propagation mechanism and the permeability evolution of the fault fracture zone in coastal deep mines, the nuclear magnetic resonance (NMR) tests and the triaxial mechanical properties tests of rock specimens rock mass specimens with different joint dip angles under hydro-mechanical coupling were carried out. Based on the investigation of the surrounding rock joints and the analysis of rock composition, the rock physics experimental model was prepared. The evolution mechanism of rock porosity is obtained by NMR test. The changes of mechanical properties, acoustic emission (AE) and permeability characteristics of rock specimens with different joint dip angles were studied, and the evolution mechanism of permeability properties with different joint dip angles is revealed by combining the microstructure and joint tip expansion mechanism. When the jointed rock mass specimens reach the peak stress, the bearing capacity of the specimens decreases slowly, and the specimens show the characteristics of progressive failure. The specimen generates micro-cracks at the joint tip under the action of axial pressure, micro-cracks evolve and expand with the increase of pressure, the permeability coefficient gradually increases. The main fracture of jointed rock mass specimens is the fracture that originates from the joint tip and extends along the axial direction until the specimen loses its bearing capacity.
引用
收藏
页码：2763 / 2778
页数：15
相关论文
共 97 条
[21]  
LaMoreaux JW(2018)An integrated GIS-based approach for geohazards risk assessment in coal mines Enviro Earth Sci 77 1-756
[22]  
Wu Q(2016)Mining-induced void distribution and application in the hydro-thermal investigation and control of an underground coal fire: A case study Process Saf Environ Prot 102 734-266
[23]  
Lee H(2017)Separation and fracturing in overlying strata disturbed by longwall mining in a mineral deposit seam Eng Geol 226 257-228
[24]  
Lee JW(2019)Experimental investigation of rock breakage by a conical pick and its application to non-explosive mechanized mining in deep hard rock Int J Rock Mech Min Sci 12 204-239
[25]  
Li S(2020)Analysis method of water inrush for tunnels with damaged water-resisting rock mass based on finite element method-smooth particle hydrodynamics coupling Comput Geotech 126 231-5917
[26]  
Liu R(2020)Guidance for the integrated use of hydrological, geochemical, and isotopic tools in mining operations Mine Water Environ 39 5905-321
[27]  
Zhang Q(2016)Scenario analysis of mine water inrush hazard using Bayesian networks Saf Sci 89 221-277
[28]  
Li G(2019)Stress-dependent anisotropy index of strength and deformability of jointed rock mass: insights from a numerical study Bull Eng Geol Env 78 273-1213
[29]  
Meng Z(2020)The classifications of water and mud/rock inrush hazard: a review and update Bull Eng Geol Env 11 1203-527
[30]  
Wang X(2020)Modified Nishihara model and experimental verification of deep rock mass under the water-rock interaction Int J Rock Mech Min Sci 128 911-195
12345678910