Fracture propagation and permeability evolution mechanism of jointed rock mass in coastal mines

被引：0
作者：
Bingqian Yan
Qingjie Qi
Jianzhong Liu
Meifeng Cai
Xiangshang Li
Peitao Wang
机构：
[1] Emergency Science Research Institute,China Coal Research Institute
[2] China Coal Research Institute,China Coal Technology and Engineering Group
[3] State Key Laboratory of Coal Mining and Clean Utilization,School of Civil and Resource Engineering
[4] China Coal Technology and Engineering Group,undefined
[5] University of Science and Technology Beijing,undefined
来源：
Rock Mechanics and Rock Engineering | 2023年 / 56卷
关键词：
NMR; Fracture propagation; Acoustic emission; Permeability coefficient; Microstructure;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
To study the fracture propagation mechanism and the permeability evolution of the fault fracture zone in coastal deep mines, the nuclear magnetic resonance (NMR) tests and the triaxial mechanical properties tests of rock specimens rock mass specimens with different joint dip angles under hydro-mechanical coupling were carried out. Based on the investigation of the surrounding rock joints and the analysis of rock composition, the rock physics experimental model was prepared. The evolution mechanism of rock porosity is obtained by NMR test. The changes of mechanical properties, acoustic emission (AE) and permeability characteristics of rock specimens with different joint dip angles were studied, and the evolution mechanism of permeability properties with different joint dip angles is revealed by combining the microstructure and joint tip expansion mechanism. When the jointed rock mass specimens reach the peak stress, the bearing capacity of the specimens decreases slowly, and the specimens show the characteristics of progressive failure. The specimen generates micro-cracks at the joint tip under the action of axial pressure, micro-cracks evolve and expand with the increase of pressure, the permeability coefficient gradually increases. The main fracture of jointed rock mass specimens is the fracture that originates from the joint tip and extends along the axial direction until the specimen loses its bearing capacity.
引用
收藏
页码：2763 / 2778
页数：15
相关论文
共 97 条
[1]  
Ardeshir A(2014)Risk assessment of construction projects for water conveyance tunnels using fuzzy fault tree analysis Inter J Civil Eng 12 396-412
[2]  
Amiri M(2016)Prediction and prevention of rockburst in metal mines–A case study of Sanshandao gold mine J Rock Mech Geotech Eng 8 204-211
[3]  
Ghasemi Y(2007)A study of isolated draw zones in block caving mines by means of a large 3D physical model Int J Rock Mech Min Sci 44 860-870
[4]  
Cai M(2019)Preliminary study on the feasibility of co-exploitation of coal and uranium Int J Rock Mech Min Sci 123 104098-193
[5]  
Castro R(2018)Influential factors and control of water inrush in a coal seam as the main aquifer Int J Min Sci Technol 28 187-2851
[6]  
Trueman R(2018)Prediction of water inflow to mechanized tunnels during tunnel-boring-machine advance using numerical simulation Hydrogeol J 26 2827-167
[7]  
Halim A(2018)Migration-based microseismic event location in the Schlema-Alberoda mining area Int J Rock Mech Min Sci 110 161-317
[8]  
Cui G(2014)Delineating subterranean water conduits using hydraulic testing and machine performance parameters in TBM tunnel post-grouting Int J Rock Mech Min Sci 70 308-145
[9]  
Wei J(2014)New development in theory and practice in mine water control in China Carbon Evap 29 141-797
[10]  
Feng XT(2021)Permeability evaluation for artificial single rock fracture according to geometric aperture variation using electrical resistivity J Rock Mech Geotech Eng 13 787-766
12345678910