The Effect of Growth Rate on the Microstructure and Mechanical Properties of 7020 Alloys

被引：0
作者：
Hasan Kaya
Uğur Büyük
Emin Çadırlı
Mevlüt Şahin
Mehmet Gündüz
机构：
[1] Erciyes University,Department of Science Education, Education Faculty
[2] Niğde Ömer Halisdemir University,Department of Physics, Faculty of Arts and Sciences
[3] Niğde Ömer Halisdemir University,Technical Vocational School of Sciences
[4] Erciyes University,Department of Physics, Faculty of Science
来源：
Journal of Materials Engineering and Performance | 2022年 / 31卷
关键词：
7020 alloy; compressive yield strength; dendritic spacings; fracture surface analysis; microhardness; ultimate tensile strength;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The 7020 aluminum alloy is one of the hardenable Al-Zn-Mg based alloys, which are a family of high strength aluminum alloys. These 7020 alloys are commonly used in the aircraft and automotive industries. The microstructural changes have a significant impact on the mechanical properties of binary and multi-component alloys. For this reason, 7020 aluminum alloys were prepared with different growth rates on account of the changes in the microstructures; thus, directionally solidification processes were actualized with a Bridgman furnace at five various growth rates (V = 8.3-166.0 µm/s) and at constant temperature gradient (G = 8.3 K/mm). Microhardness (HV), ultimate tensile strength (σU) and yield strength (σy) of the solidified alloys were determined. The HV increased from 758.8 to 917.1 N/mm2, the σU from 125.4 to 208.1 N/mm2 and the σy from 133.7 to 230.8 N/mm2 with an increase in growth rate from 8.3 to 166.0 μm/s.
引用
收藏
页码：1622 / 1630
页数：8
相关论文
共 186 条
[1]  
Boettinger WJ(2000)Solidification Microstructures: Recent Developments, Future Directions Acta Mater. 48 43-70
[2]  
Coriell SR(2005)Some Effects of Solidification Kinetics on Microstructure Formation in Aluminium-Base Alloys Mat. Sci. Eng. A 413–414 165-173
[3]  
Greer AL(2004)Multiphase Solidification in Multicomponent Alloys Mat. Sci. Eng. R 46 1-49
[4]  
Karma A(2015)Interfacial Morphology Evolution in Directionally Solidified Al−1.5%Cu Alloy Trans. Non. Met. Soc. China 25 405-411
[5]  
Kurz W(2014)Stability of Dendrite Growth During Directional Solidification in the Presence of a Non-axial Thermal Field Acta Mater. 78 23-36
[6]  
Rappaz M(2014)Effect of an Axial High Magnetic Field on Sn Dendrite Morphology of Pb−Sn Alloys During Directional Solidification J. Alloys Compd. 588 190-198
[7]  
Trivedi R(2007)Influence of Thermoelectric Effects on the Solid-Liquid Interface Shape and Cellular Morphology in the Mushy Zone During the Directional Solidification of Al–Cu Alloys under a Magnetic Field Acta Mater. 55 3803-3813
[8]  
Jones H(2013)The Evolution of the Growth Morphology in Mg−Al Alloys Depending on the Cooling Rate During Solidification Acta Mater. 61 4848-4860
[9]  
Hecht U(2007)Eutectic Growth in Three Dimensions Metal. Mater. Trans. A 38 1417-1425
[10]  
Granasy L(2009)Unidirectional Solidification of Zn-rich Zn-Cu Hypoperitectic Alloy J. Mat. Res. 24 p3422-3431
12345678910