Analysis of material removal and surface generation mechanism of ultrasonic vibration–assisted EDM

被引：2
作者：
Yan Wang
Zhiqiang Liu
Jian Shi
Yinghuai Dong
Shuo Yang
Xiaofeng Zhang
Bin Lin
机构：
[1] Tianjin University of Science and Technology,Key Laboratory of Advanced Ceramics and Machining Technology, Ministry of Education
[2] Tianjin Key Laboratory of Integrated Design and On-line Monitoring for Light Industry & Food Machinery and Equipment,undefined
[3] Tianjin University,undefined
来源：
The International Journal of Advanced Manufacturing Technology | 2020年 / 110卷
关键词：
UEDM; Material removal mechanism; Surface generation mechanism; Surface topography;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Ultrasonic vibration–assisted EDM (UEDM) has excellent performance on difficult-to-machine materials processing such as titanium alloy, stellite, and nickel-based alloy, and it was hard to describe the material removal process and surface generation mechanism due to the complex physiochemical reactions during UEDM. In the present study, the material removal mechanism is fundamentally studied based on heat transfer theory. The model of microscopic removal volume of single pulse in UEDM is established according to the characteristics of EDM removal mechanism and the interference of ultrasonic vibration energy. The micro-surface topography generating process is described and the influence of ultrasonic vibration on the machined surface is analyzed. Both simulation calculation and experiment validation are executed in order to verify the accuracy of the theoretical derivation. As the experimental results have shown, the surface-generating process is matching well with the theoretical deduction; the carbon deposit area is reduced and the surface roughness is decreased due to the ultrasonic vibration interference. The machined surface quality can be modified by adjusting the matching performance of ultrasonic vibration energy and EDM energy.
引用
收藏
页码：177 / 189
页数：12
相关论文
共 36 条
  • [1] Wang Y(2014)Study on the system matching of ultrasonic vibration assisted grinding for hard and brittle materials processing Int J Mach Tools Manuf 77 66-73
  • [2] Lin B(2018)Parametric study of ultrasonic-assisted hole sinking micro-EDM of titanium alloy Int J Adv Manuf Technol 94 2551-2562
  • [3] Wang S(2009)Effect of ultrasonic-assisted EDM on the surface integrity of cemented tungsten carbide (WC-Co) Int J Adv Manuf Technol 41 268-280
  • [4] Cao X(2008)Effect of ultrasonic vibration of tool on electrical discharge machining of cemented tungsten carbide (WC-Co) Int J Adv Manuf Technol 38 1137-1147
  • [5] Singh P(2008)Study of vibration-assisted micro-EDM—the effect of vibration on machining time and stability of discharge Precis Eng 32 269-277
  • [6] Yadava V(2012)Study on electrical discharge and ultrasonic assisted mechanical combined machining of polycrystalline diamond Diamond Abrasives Eng 6 589-593
  • [7] Narayan A(2018)Ultrasonic assisted electrical discharge machining for high aspect ratioblind holes Procedia CIRP 68 81-85
  • [8] Abdullah A(2013)Realization of micro-EDM under ultra-small discharge energy by applying ultrasonic vibration to machining fluid Procedia CIRP 6 326-331
  • [9] Shabgard M(2016)Experimental study on horizontal ultrasonic electrical discharge machining J Mater Process Technol 231 312-318
  • [10] Ivanov A(2018)Investigation on the variability of existing models for simulation of local temperature field during a single discharge for electrical discharge machining (EDM) Procedia Cirp 68 260-265
1234