Correction: Assessment and Validation of Incremental Hole-Drilling Calculation Methods for Residual Stress Determination in Fiber-Metal Laminates

被引：0

作者：

T. C. Smit

J. P. Nobre

R. G. Reid

T. Wu

T. Niendorf

D. Marais

A. M. Venter

机构：

[1] University of the Witwatersrand,School of Mechanical, Industrial and Aeronautical Engineering

[2] CFisUC,Univ Coimbra

[3] Department of Physics,Institute of Materials Engineering

[4] University of Kassel,Research and Innovation Division

[5] The South African Nuclear Energy Corporation (Necsa) SOC Limited,undefined

来源：

Experimental Mechanics | 2022年 / 62卷

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

引用

页码：1241 / 1241

共 50 条

[41] Determination of residual stress by use of phase shifting moire interferometry and hole-drilling method
Min, Y
Hong, M
Xi, Z
Jian, L
OPTICS AND LASERS IN ENGINEERING, 2006, 44 (01) : 68 - 79
[42] A new calculation procedure for non-uniform residual stress analysis by the hole-drilling method
Petrucci, G
Zuccarello, B
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 1998, 33 (01): : 27 - 37
[43] Far-Field Boundary Conditions for Calculation of Hole-Drilling Residual Stress Calibration Coefficients
Antonio Baldi
Experimental Mechanics, 2017, 57 : 659 - 664
[44] Residual Stress Analysis on Thick Film Systems by the Incremental Hole-Drilling Method – Simulation and Experimental Results
E. Obelode
J. Gibmeier
Experimental Mechanics, 2013, 53 : 965 - 976
[45] Residual Stress Analysis on Thick Film Systems by the Incremental Hole-Drilling Method - Simulation and Experimental Results
Obelode, E.
Gibmeier, J.
EXPERIMENTAL MECHANICS, 2013, 53 (06) : 965 - 976
[46] Non-destructive evaluation methods for damage assessment in fiber-metal laminates
Fahr, A
Chapman, CE
Laliberté, JF
Forsyth, DS
Poon, C
POLYMER COMPOSITES'99: AN INTERNATIONAL SYMPOSIUM ON POLYMER COMPOSITES SCIENCE AND TECHNOLOGY, 1999, : 21 - +
[47] Residual stress analysis on thick film systems by the incremental hole-drilling method - Simulation and experimental results
Institute for Applied Materials, Karlsruhe Institute for Technology, Engelbert-Arnold-Str. 4, 76131 Karlsruhe, Germany
Proc. Soc. Exp. Mech., Inc., 6 (965-976):
[48] Verification of the eccentric hole influence on accuracy of the residual stress determination by Hole-drilling strain gage method
Vitek, Karel
Havlik, Vojtech
PROCEEDINGS OF THE 50TH ANNUAL CONFERENCE ON EXPERIMENTAL STRESS ANALYSIS, 2012, : 525 - +
[49] Far-Field Boundary Conditions for Calculation of Hole-Drilling Residual Stress Calibration Coefficients
Baldi, A.
EXPERIMENTAL MECHANICS, 2017, 57 (04) : 659 - 664
[50] Residual Stress Determination by Hole Drilling Combined with Optical Methods
D. V. Nelson
Experimental Mechanics, 2010, 50 : 145 - 158

← 1 2 3 4 5 →