Investigation on the behaviour and strength of cold-formed steel web stiffened built-up battened columns

被引：0
作者：
M. Anbarasu
K. Kanagarasu
S. Sukumar
机构：
[1] Government College of Engineering,Department of Civil Engineering
来源：
Materials and Structures | 2015年 / 48卷
关键词：
Battened column; Built-up column; CFS columns; Direct strength method; Distortional buckling; Numerical simulation; Web stiffened lipped channel;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Cold-formed steel built-up sections are commonly used as compression elements to carry larger loads and over longer spans when a single individual section is insufficient. This paper reports a numerical study of the cold-formed steel built-up web stiffened lipped channel sections under axial compression. The built-up sections are formed by two identical lipped channels placed back to back with batten plates and are connected by self-driving screw. The Finite element model is developed by ABAQUS software and the model is validated with the results available in the literature. Three types of web stiffened lipped channel cross section have been chosen for the study, based on the AISI-S100:2007 Geometric limitations. The parametric study is extended by the validated model for various slenderness ratios. The column strength predicted by the finite element analysis is compared with the design column strengths predicted by direct strength method (DSM). Based on this study a recommendation is proposed to DSM.
引用
收藏
页码：4029 / 4038
页数：9
相关论文
共 50 条
[41]   Experimental Study of Cold-Formed Steel Built-Up Beams [J].
Meza, Francisco J. ;
Becque, Jurgen ;
Hajirasouliha, Iman .
JOURNAL OF STRUCTURAL ENGINEERING, 2020, 146 (07)
[42]   Behaviour of Cold Formed Steel Built-Up Channel Columns Strengthened Using CFRP [J].
Sivakumar Naganathan ;
H. G. Nahushananda Chakravarthy ;
Noor Amalina Anuar ;
Sreedhar Kalavagunta ;
Kamal Nasharuddin Bin Mustapha .
International Journal of Steel Structures, 2020, 20 :415-424
[43]   Finite element analysis and design of cold-formed steel built-up closed columns with flange and web intermediate stiffeners [J].
Aruna, G. ;
Karthika, V ;
Sukumar, S. .
CANADIAN JOURNAL OF CIVIL ENGINEERING, 2020, 47 (10) :1175-1187
[44]   Experimental study of the cross-sectional capacity of cold-formed steel built-up columns [J].
Meza, Francisco J. ;
Becque, Jurgen ;
Hajirasouliha, Iman .
THIN-WALLED STRUCTURES, 2020, 155
[45]   GBT-based buckling analysis of cold-formed steel built-up section columns [J].
Basaglia, Cilmar ;
Camotim, Dinar ;
Goncalves, Rodrigo .
THIN-WALLED STRUCTURES, 2025, 215
[46]   Experimental and numerical investigations on axial strength of back-to-back built-up cold-formed steel angle columns [J].
Ananthi, G. Beulah Gnana ;
Roy, Krishanu ;
Lim, James B. P. .
STEEL AND COMPOSITE STRUCTURES, 2019, 31 (06) :601-615
[47]   Experimental study on the composite action in sheathed and bare built-up cold-formed steel columns [J].
Fratamico, David C. ;
Torabian, Shahabeddin ;
Zhao, Xi ;
Rasmussen, Kim J. R. ;
Schafer, Benjamin W. .
THIN-WALLED STRUCTURES, 2018, 127 :290-305
[48]   Experimental investigation on the axial compression behavior of cold-formed steel triple-limbs built-up columns with half open section [J].
Sang, Liurui ;
Zhou, Tianhua ;
Zhang, Lei ;
Chen, Bin ;
Wang, Shuaibing .
THIN-WALLED STRUCTURES, 2022, 172
[49]   Behaviour and design of cold-formed steel built-up section beams with different screw arrangements [J].
Wang, Liping ;
Young, Ben .
THIN-WALLED STRUCTURES, 2018, 131 :16-32
[50]   Cold-formed steel built-up closed sections with intermediate stiffeners [J].
Young, Ben ;
Chen, Ju .
PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE ON STEEL, SPACE & COMPOSITE STRUCTURES, 2007, :43-+
12345