Influence of data size on the reliability assessment of creep life of grade 91 steel

被引：0
作者：
Woo-Gon Kim
Jae-Young Park
B. K. Choudhary
Seon-Jin Kim
Min-Hwan Kim
Jinsung Jang
机构：
[1] Korea Atomic Energy Research Institute,Nuclear Materials Division
[2] Pukyong National University,Dept. of Mechanical Design Engineering
[3] Indira Gandhi Centre for Atomic Research,Metallurgy and Materials Group
来源：
Journal of Mechanical Science and Technology | 2014年 / 28卷
关键词：
Creep; Grade 91 steel; Creep life; Reliability; Z-parameter;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Influence of data size on a reliability assessment of the long-term creep life of Grade 91 steel was investigated for two different sets of large body of creep-rupture data comprising 690 (Set-1) and 1072 (Set-2) data points. The Z-parameter on the Larson-Miller parameter of creep rupture data supported a normal distribution well. Based on the normal distribution, the reliability of the predicted creep life for the two data sets was assessed to obtain variations in reliability owing to fluctuations in the service conditions and the dispersion of the creep data using a service condition-creep rupture property interference (SCRI) model. A large number of random variables for Z-parameter were generated using Monte-Carlo simulation. A reliability assessment for the two data sizes under specific service conditions has been comparatively demonstrated. It was found that the size of the creep-rupture data influenced the reliability of the creep life prediction.
引用
收藏
页码：4493 / 4501
页数：8
相关论文
共 63 条
[1]  
Kim W. G.(2002)Evaluation of Monkman- Grant parameters for type 316LN and modified 9Cr- 1Mo stainless steels J. Mech. Sci. Technol. 16 1420-1427
[2]  
Kim S. H.(2010)A perspective on creep and fatigue issues in sodium cooled fast reactors Trans. Indian Inst. Met. 63 75-84
[3]  
Ryu W. S.(2009)Generation of isochronous stress-strain curves with a nonlinear least square fitting method for modified 9Cr-1Mo steel Met. Mater. Int. 15 727-732
[4]  
Raj B.(2011)Samuel, Creep behavior of modified 9Cr-1Mo steel J. Nucl. Mater. 412 82-89
[5]  
Choudhary B. K.(2011)Reliability prediction of long-term creep strength of Gr. 91 steel for next generation reactor structure materials Kor. J. Met. Mater. 29 275-280
[6]  
Kim W. G.(2003)Selection of materials for prototype fast breeder reactor Trans. Indian. Inst. Met. 56 155-178
[7]  
Yin S. N.(2013)High temperature design of finned-tube sodium-to-air heat exchanger in a sodium test loop Nucl. Eng. Des 265 833-840
[8]  
Koo G. H.(1952)A time-temperature relationship for rupture and creep stresses Trans. ASME 74 765-771
[9]  
Choudhary B. K.(1954)Correlations of rupture data for metals at elevated temperature Trans. ASME 46 113-118
[10]  
Isaac E.(1992)The theta projection concept-A model-based approach to design and life extension of engineering plant Int. J. Pres. Ves. Piping 50 147-160
1234567