Microstructural characterization of laser surface-melted Inconel 718

被引：0
作者：
Sumit K. Sharma
K. Biswas
A. K. Nath
I. Manna
J. Dutta Majumdar
机构：
[1] Indian Institute of Technology,Department of Metallurgical and Materials Engineering
[2] Indian Institute of Technology,Department of Mechanical Engineering
来源：
Journal of Optics | 2020年 / 49卷
关键词：
Laser surface melting; Inconel 718; Microstructures; Microhardness;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In the present study, a detailed study of the effect of laser parameters on microstructure and phases of the laser surface-melted (using 2 kW continuous wave Yb-fibre laser) Inconel 718 has been carried out. Surface melting has been conducted with a power of 400 watts, scan speed of 500, 750, and 1000 mm/min and with a spot diameter of 3 mm. After laser surface melting, the microstructures, phase, surface roughness and crystallographic orientation (texture) of the melt zone has been carried out. There is refinement of microstructure and change in crystallographic texture which varied with process parameters. The effect of process parameters on the microhardness of the melt zone has been studied in detail.
引用
收藏
页码：494 / 509
页数：15
相关论文
共 124 条
[1]  
Li X(2019)Improved plasticity of inconel 718 superalloy fabricated by selective laser melting through a novel heat treatment process Mater. Des. 180 107915-1216
[2]  
Shi JJ(1985)Precipitation around welds in the nickel-base superalloy Inconel 718 Acta Metall. Pergamon 33 1205-520
[3]  
Cao GH(2008)Microstructures and mechanical properties of inconel 718 welds by CO J. Mater. Process. Technol. 201 515-298
[4]  
Russell AM(2010) laser welding Intell. Energy F. Manuf. Interdiscip. Process. Innov. 6608 259-431
[5]  
Zhou ZJ(2016)Laser material processing Mater. Lett. 164 428-581
[6]  
Li CP(2010)Microstructure and mechanical properties of selective laser melted inconel 718 compared to forging and casting Scr. Mater. 62 579-8
[7]  
Chen GF(2016)Mechanical properties of a laser-surface-alloyed magnesium-based alloy (AZ91) with nickel Mater Manuf Process 0 1-171
[8]  
Vincent R(2014)Effect of different heat treatments on the microstructure and mechanical properties in selective laser melted INCONEL 718 Alloy Opt. Laser Technol. 62 161-140
[9]  
Hong JK(2017)Selective laser melting additive manufactured inconel 718 superalloy parts: high-temperature oxidation property and its mechanisms Scr. Mater. 136 136-749
[10]  
Park JH(2010)Gamma-gamma prime-gamma double prime dual-superlattice superalloys Opt. Lasers Eng. 48 740-112
12345678910