Tailoring the Mechanical Properties of a Twinning-Induced Plasticity Steel by Retention of Deformation Twins During Heat Treatment

被引：0
作者：
Christian Haase
Luis Antonio Barrales-Mora
Dmitri A. Molodov
Günter Gottstein
机构：
[1] RWTH Aachen University,Institute of Physical Metallurgy and Metal Physics
来源：
Metallurgical and Materials Transactions A | 2013年 / 44卷
关键词：
Cold Rolling; Twin Boundary; Stack Fault Energy; Deformation Twin; TWIP Steel;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The relation between microstructure and mechanical properties of a 30 pct cold-rolled, recovery-annealed, and recrystallization-annealed Fe-23Mn-1.5Al-0.3C twinning-induced plasticity (TWIP) steel was studied. The thermal stability of deformation-induced twin boundaries along with a reduced dislocation density due to annihilation during recovery annealing at 903 K (630 °C) was found to be a simple, promising processing route to overcome the shortcoming of low yield strength usually associated with TWIP steels.
引用
收藏
页码：4445 / 4449
页数：4
相关论文
共 53 条
[1]  
Grässel O.(1997)undefined J. Phys. IV 7 383-88
[2]  
Frommeyer G.(2011)undefined Curr. Opin. Solid State Mater. Sci. 15 141-68
[3]  
Derder C.(2000)undefined Int. J. Plast. 16 1391-1409
[4]  
Hofmann H.(2011)undefined Int. J. Mater. Res. 102 538-49
[5]  
Bouaziz O.(2013)undefined Scripta Mater. 68 813-16
[6]  
Allain S.(2008)undefined Scripta Mater. 58 484-87
[7]  
Scott C.P.(2009)undefined Scripta Mater. 60 714-16
[8]  
Cugy P.(1984)undefined Acta Metall. 32 1117-38
[9]  
Barbier D.(2011)undefined Metall. Mater. Trans. A 43A 1688-704
[10]  
Grässel O.(2013)undefined Metall. Mater. Trans. A 44A 911-22
123456