On the wave-cancelling nature of boundary layer flow control

被引:0
作者
Kenzo Sasaki
Pierluigi Morra
Nicoló Fabbiane
André V. G. Cavalieri
Ardeshir Hanifi
Dan S. Henningson
机构
[1] Instituto Tecnológico de Aeronáutica (ITA),Aerodynamics Department
[2] KTH Royal Institute of Technology,Linné FLOW Centre
[3] The French Aerospace Lab (ONERA),Department of Fundamental and Experimental Aerodynamics
来源
Theoretical and Computational Fluid Dynamics | 2018年 / 32卷
关键词
Boundary layer control; Flow control; Instability control; LQG controllers; Inversion controllers;
D O I
暂无
中图分类号
学科分类号
摘要
This work deals with the feedforward active control of Tollmien–Schlichting instability waves over incompressible 2D and 3D boundary layers. Through an extensive numerical study, two strategies are evaluated; the optimal linear–quadratic–Gaussian (LQG) controller, designed using the Eigensystem realization algorithm, is compared to a wave-cancellation scheme, which is obtained using the direct inversion of frequency-domain transfer functions of the system. For the evaluated cases, it is shown that LQG leads to a similar control law and presents a comparable performance to the simpler, wave-cancellation scheme, indicating that the former acts via a destructive interference of the incoming wavepacket downstream of actuation. The results allow further insight into the physics behind flow control of convectively unstable flows permitting, for instance, the optimization of the transverse position for actuation. Using concepts of linear stability theory and the derived transfer function, a more efficient actuation for flow control is chosen, leading to similar attenuation of Tollmien–Schlichting waves with only about 10% of the actuation power in the baseline case.
引用
收藏
页码:593 / 616
页数:23
相关论文
共 112 条
[1]  
Arnold WF(1984)Generalized eigenproblem algorithms and software for algebraic Riccati equations Proc. IEEE 72 1746-1754
[2]  
Laub AJ(2009)Input–output analysis, model reduction and control of the flat-plate boundary layer J. Fluid Mech. 620 263-298
[3]  
Bagheri S(2011)Transition delay using control theory Philos. Trans. R. Soc. Lond. A Math. Phys. Eng. Sci. 369 1365-1381
[4]  
Brandt L(2009)Input–output analysis and control design applied to a linear model of spatially developing flows Appl. Mech. Rev. 62 020803-362
[5]  
Henningson DS(2012)Closed-loop control of unsteadiness over a rounded backward-facing step J. Fluid Mech. 703 326-53
[6]  
Bagheri S(2009)Closed-loop control of an open cavity flow using reduced-order models J. Fluid Mech. 641 150-124
[7]  
Henningson DS(2011)Input-output measures for model reduction and closed-loop control: application to global modes J. Fluid Mech. 685 23-474
[8]  
Bagheri S(2013)Feedback control of instabilities in the two-dimensional Blasius boundary layer: the role of sensors and actuators Phys. Fluids (1994-present) 25 054106-272
[9]  
Henningson DS(1991)Analysis of the linear stability of compressible boundary layers using the PSE Theoret. Comput. Fluid Dyn. 3 117-296
[10]  
Hoepffner J(1992)Linear and nonlinear stability of the Blasius boundary layer J. Fluid Mech. 242 441-1871