FEM based delamination damage analysis of bonded FRP composite pipe joints

被引：3
作者：
U. Kumar
P. Kumar
M. T. Noor
R. R. Das
机构：
[1] Indian Institute of Technology (Indian School of Mines),Department of Mining Machinery Engineering
来源：
ISSS Journal of Micro and Smart Systems | 2018年 / 7卷 / 1期
关键词：
Bonded joint; Delamination; FEM; FRP composite;
D O I：
10.1007/s41683-018-0022-6
中图分类号：
学科分类号：
摘要：
Delamination damage is one of the major type of fractures encountered by laminated FRP structures, greatly effecting their structural stability. Development of finite element method (FEM) based modelling and simulation technique in order to analyze delamination growth in laminated FRP composite made single lap pipe joints, is the prime concern of the present research. Layered solid 185 elements of ANSYS 18.0 has been used for modelling the FRP composite tubes. Ansys Parametric Design Language (APDL) codes have been developed to simulate delaminations and study their effect on interlaminar stresses. Delamination damages have been considered in the ply-interfaces of the composite tubes in the close vicinity of the adhesive layer and their effect on the adhesive mid-layer stresses has been studied. Comparison of delamination damages in the outer and inner tubes on adhesive stresses revealed that damages in the inner tube are more critical as compared to the delaminated outer adherend.
引用
收藏
页码：45 / 51
页数：6
相关论文
共 34 条
[1]  
Aydin MD(2008)3-D nonlinear stress analysis on adhesively bonded single lap composite joints with different ply stacking sequences J Adhes 84 15-36
[2]  
Baishya N(2017)Failure analysis of adhesively bonded tubular joints of laminated FRP composites subjected to combined internal pressure and torsional loading J Adhes Sci Tech 29 319-330
[3]  
Das RR(2009)Analytical models of adhesively bonded joints-Part I: literature survey Int J Adhes Adhes 30 425-438
[4]  
Panigrahi SK(2010)Adhesion failure analyses of bonded tubular single lap joints in laminated fibre reinforced plastic composites Int J Adhes Adhes 25 41-67
[5]  
da Silva Lucas FM(2011)Finite element based design and adhesion failure analysis of bonded tubular socket joints made with laminated FRP composites J Adhes Sci Tech 23 772-790
[6]  
Das RR(2014)Delamination damage analysis of laminated bonded tubular single lap joint made of fiber-reinforced polymer composite Int J Damage Mech 23 1827-1844
[7]  
Pradhan B(2009)Stress analysis of tubular adhesive joints with delaminated adherend J Adhes Sci Tech 93 1765-1774
[8]  
Das RR(2011)Influence of adherend’s delamination on the response of single lap and socket tubular adhesively bonded joints subjected to torsion Compos Struct 18 298-311
[9]  
Pradhan B(1984)Analysis and optimization of a tubular lap joint subjected to torsion J Comp Mater 91 186-195
[10]  
Das RR(2009)Non-linear investigation of overlap length effect on torsional capacity of tubular adhesively bonded joints Compos Struct 67 1320-1329
1234