The influence of fiber orientation on electromagnetic shielding in liquid-crystal polymers

被引:0
作者
W. S. Jou
T. L. Wu
S. K. Chiu
W. H. Cheng
机构
[1] National Kaohsiung University of Applied Sciences,Department of Mold and Die Engineering
[2] National Sun Yat-sen University,Department of Electrical Engineering
[3] National Sun Yat-sen University,Institute of Electro
来源
Journal of Electronic Materials | 2002年 / 31卷
关键词
Fiber orientation; electromagnetic shielding; liquid-crystal polymers; shielding effectiveness; carbon fiber;
D O I
暂无
中图分类号
学科分类号
摘要
The influence of conductive carbon-fiber orientation and weight percentage on the electromagnetic (EM) shielding effectiveness (SE) in liquid-crystal polymer (LCP) composites was investigated experimentally and theoretically. The experimental results show that the SE of LCP composites with longitudinal fiber orientation is higher than random fiber orientation under the same weight percentage of carbon fibers filled. This is because longitudinal fiber orientation is parallel to the electric field of the incident EM wave, and most of the energy of the incident wave is reflected by the longitudinal fiber. In comparison with nylon66 composites, the SEs of LCP composites with longitudinal fiber orientation are also higher than nylon66 composites with the same content of carbon fibers. Furthermore, the SE of 20% conductive carbon-fiber-filled LCP composites was measured to be 50 dB at a frequency of 0.3 GHz and 53 dB at 1 GHz, which is at least 10 dB higher than that of nylon66 composites. The SE predicted by theoretical models and measured by experiments was in good agreement for carbon-fiber-filled LCP composites of longitudinal and random fiber orientations.
引用
收藏
页码:178 / 184
页数:6
相关论文
共 50 条
  • [31] Research Progress of Electromagnetic Shielding Material of Metal Fiber
    Wang Jianzhong
    Xi Zhengping
    Tang Huiping
    Huang Weidong
    Zhu Jilei
    Li Cheng
    Ao Qingbo
    Zhi Hao
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 (09) : 1688 - 1692
  • [32] Electromagnetic shielding characteristics of optical-fiber feedthroughs
    Masterson, KD
    Novotny, DR
    Koepke, GH
    IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, 2001, 43 (02) : 177 - 186
  • [34] Effect of fiber geometry on the electromagnetic shielding performance of mortar
    Kim, Young Jun
    Yemam, Dinberu M.
    Kim, Baek-Joong
    Yi, Chongku
    COMPUTERS AND CONCRETE, 2016, 17 (02) : 281 - 294
  • [35] Effect of fiber hybridization on the electromagnetic shielding of UHPFRCC panel
    Lee, Ho-Jin
    Choi, Jin-Seok
    Yoo, Doo-Yeol
    Yoon, Young-Soo
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 29 : 4004 - 4017
  • [36] Photodeformable Liquid Crystal Polymers
    Qing, Xin
    Lv, Jiu-an
    Yu, Yan-lei
    ACTA POLYMERICA SINICA, 2017, (11): : 1679 - 1705
  • [37] A novel structure of woven continuous-carbon fiber composites with high electromagnetic shielding
    Wern Shiarng Jou
    Journal of Electronic Materials, 2004, 33 : 162 - 170
  • [38] Electromagnetic shielding performance of copper wire/carbon fiber fabric reinforced composite materials
    Wu, Jiangxing
    Gao, Yantao
    Lu, Zan
    Yang, Xue
    Xin, Binjie
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2024,
  • [40] A novel structure of woven continuous-carbon fiber composites with high electromagnetic shielding
    Jou, WS
    JOURNAL OF ELECTRONIC MATERIALS, 2004, 33 (03) : 162 - 170