Biosorption of heavy metals from acid mine drainage onto biopolymers (chitin and α (1,3) β-D-glucan) from industrial biowaste exhausted brewer’s yeasts (Saccharomyces cerevisiae L.)

A biosorption process has been developed for the bioremediation of heavy metal-contaminated acid drainages from Merladet and Faith open-cast mines, located in western Spain. The process is based on the physico-chemical properties for the adsorption, ion exchange, and complexation of metal ions by biopolymers (chitin and α (1,3) β-D-glucan) from industrial biowaste exhausted brewer’s yeast (Saccharomyces cerevisiae L.). Firstly, the chemical composition (U, Mn, Al, Fe, Cu, Zn, and Ni) and the physico-chemical and ecological states of these acid mine drainages were characterised. Furthermore, the selectivity for Zn, Cu, Mn, Ni, and Al the first order kinetics and the performance of the metals biosorption process by exhausted brewer’s yeast were evaluated with polluted acid synthetic waters and mine drainages. The biosorption equilibria were reached in 10 ∼ 15 min following Langmuir type isotherms with higher affinity constants for metal-biosorbent binding for synthetic waters than for acid mine drainages. The efficiency of the process with real water samples was markedly lower for the case of Mn, and zero for Zn and Al. An antagonistic interference on the biosorption of a metal due to the presence of other metals is proposed. Finally, the ecotoxicity of the acid mine drainage was removed when it was incubated with brewer’s yeast trapped in polyurethane foam.