The Annealing Behavior of the Subsurface Zone Induced by Friction in Bismuth Detected by Positron Lifetime Technique

The annealing behavior of the subsurface zone (SZ) in pure bismuth induced by dry sliding was studied using the positron lifetime measurement. This measurement allows us to detect the SZ and its recovery, and recrystallization processes. The comparative measurements of the sample exposed to compression revealed the thermal stability of the SZ. The compressed sample rebuilt its structure due to the recovery and recrystallization processes at the temperature of 60 °C, whereas the sample exposed to dry sliding does it at higher temperature of 260 °C, which is close to the melting point. The isothermal annealing at the temperature of 100 °C confirmed these results. The defect depth profile induced by dry sliding evolves with the annealing temperature in such a way that the concentration of defects at the worn surface gradually decreases, but at the depth between 50 and 170 μm, the generation of new defects takes place at the temperature of 75, 100 and even at 175 °C. At the temperature of 175 °C, the defects still are extended up to the depth of about 60 μm from the worn surface. The results were qualitatively confirmed by the measurements of the Vickers microhardness depth profile. Similar annealing behavior of the SZ was observed in pure magnesium.