Partially Absorbable 3D Printed Innovative Orthopedic Implants

被引：0
作者：
Rupinder Singh
Abhishek Barwar
Abhishek Kumar
机构：
[1] National Institute of Technical Teachers Training and Research,Department of Mechanical Engineering
来源：
National Academy Science Letters | 2022年 / 45卷
关键词：
Simulated body fluid; Vector network analyzer; Dielectric constant; Loss tangent;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Commercially the orthopedic implants (OI) of metals/alloys/polymers are being widely used in clinical applications. But hitherto little has been reported on partially absorbable OI for supporting osteointegration and online health monitoring. This study outlines the 3D printed partially absorbable innovative OI comprising of 17-4 precipitate hardened stainless steel (as conductor and ground plane) and polylactic acid-based composite with the reinforcement of hydroxyapatite, and chitosan (as dielectric material). The 3D printed innovative OI of multi-materials was explored for online sensing capabilities based upon dielectric constant (εr) and loss tangent (tanδ) of dielectric material. The radio frequency and polarization resistance (Rp) analysis under the effect of simulated body fluid was conducted to ascertain the health of innovative OI in the industrial, scientific, and medical band as an internet of things-based solution.
引用
收藏
页码：417 / 421
页数：4
相关论文
共 50 条
  • [1] Partially Absorbable 3D Printed Innovative Orthopedic Implants
    Singh, Rupinder
    Barwar, Abhishek
    Kumar, Abhishek
    NATIONAL ACADEMY SCIENCE LETTERS-INDIA, 2022, 45 (05): : 417 - 421
  • [2] 3D printed elastomer ternary composites
    Korivi, Naga
    Mahbub, Rifat
    Ahmadi, Zahra
    Azadehranjbar, Soodabeh
    Shield, Jeffrey E.
    Ni, Yuanyuan
    Yuan, Yifan
    Xu, Xiaoshan
    Gong, Limin
    Jeelani, Shaik
    Rangari, Vijay
    ELECTRONICS LETTERS, 2023, 59 (08)
  • [3] Impact of 3D Printing Infill Patterns on the Effective Permittivity of 3D Printed Substrates
    Persad, Jeevan
    Rocke, Sean
    IEEE JOURNAL OF MICROWAVES, 2024, 4 (02): : 277 - 292
  • [4] Investigation of 3D Printed Dielectric Structure for Microwave Lens Prototyping
    Uskov, G. K.
    Kretov, P. A.
    Stepkin, V. A.
    Sbitnev, N. S.
    Bobreshov, A. M.
    2017 XI INTERNATIONAL CONFERENCE ON ANTENNA THEORY AND TECHNIQUES (ICATT), 2017, : 294 - 296
  • [5] 3D printed PLA/copper bowtie antenna for biomedical imaging applications
    Emine Avşar Aydın
    Ahmet Refah Torun
    Physical and Engineering Sciences in Medicine, 2020, 43 : 1183 - 1193
  • [6] 3D printed PLA/copper bowtie antenna for biomedical imaging applications
    Avsar Aydin, Emine
    Torun, Ahmet Refah
    PHYSICAL AND ENGINEERING SCIENCES IN MEDICINE, 2020, 43 (04) : 1183 - 1193
  • [7] Broadband Effective Dielectric Permittivity of Heterogeneous 3D Printed PLA Structures
    Azpurua, Marco A.
    Mateu-Mateus, Marc
    Pous, Marc
    Quilez, Marcos
    Silva, Ferran
    2022 INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC EUROPE 2022), 2022, : 335 - 339
  • [8] In Vitro Physical-Chemical Behaviour Assessment of 3D-Printed CoCrMo Alloy for Orthopaedic Implants
    Mirea, Radu
    Biris, Iuliana Manuela
    Ceatra, Laurentiu Constantin
    Ene, Razvan
    Paraschiv, Alexandru
    Cucuruz, Andrei Tiberiu
    Sbarcea, Gabriela
    Popescu, Elisa
    Badea, Teodor
    METALS, 2021, 11 (06)
  • [9] Electromechanical characterization of a 3D printed dielectric material for dielectric electroactive polymer actuators
    Gonzalez, David
    Garcia, Jose
    Newell, Brittany
    SENSORS AND ACTUATORS A-PHYSICAL, 2019, 297
  • [10] Investigations on 3D printed primary recycled ABS for one-way programming
    Jain, Chahat
    Dhaliwal, Balwinder Singh
    Singh, Rupinder
    Kumar, Vinay
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2023, 9 (03) : 1102 - 1115
12345