Fire resistance of timber-concrete composite slabsA simplified method

被引:0
作者
Anita Ogrin
Tomaž Hozjan
机构
[1] Faculty of Civil and Geodetic Engineering,
来源
Materials and Structures | 2020年 / 53卷
关键词
Timber-concrete composite; Slab; Fire; Simplified method; Effective stiffness; Laminated veneer lumber;
D O I
暂无
中图分类号
学科分类号
摘要
The paper presents a simplified method for calculation of resistance of a TCC slab in fire conditions. Within the method the tensile and the compressive failure criteria in the outermost fibres of the cross-section are checked. The influence of the fire is applied through one-dimensional charring of the timber part of the cross-section in accordance with current standards on reduction of properties of materials. The concrete-timber connection is assumed to be ideal during the determination of resistant moment of the TCC cross-section. On the other hand, the calculation of the deflection of the TCC slab is conducted with the reduction of the connection’s rigidity. The ineffective zone of the timber as well as the cracked tensile zone of concrete part do not contribute to the effective stiffness of the TCC slab. The method is validated against the results of full sized fire tests of one way spanning TCC slabs form literature. Calculated and experimentally determined midspan deflections and failure times of the TCC slabs are compared and their considerable agreement is observed. Due to its convenience and accuracy, the present simplified method represents a useful tool for designers of TCC structures in fire conditions.
引用
收藏
相关论文
共 27 条
  • [1] Hozjan T(2019)Literature review on timber-concrete composite structures in fire J Struct Eng 136 219-228
  • [2] Bedon C(2010)Fire design of timber-concrete composite slabs with screwed connections J Struct Eng 137 1085-1095
  • [3] Ogrin A(2011)State of the art on timber-concrete composite structures: literature review J Struct Eng 33 3033-3042
  • [4] Cvetkovska M(2011)The effect of ductile connectors on the behaviour of timber-concrete composite beams Eng Struct 51 1285-1309
  • [5] Klippel M(2015)The reduced cross-section method for evaluation of the fire resistance of timber members: Discussion and determination of the zero-strength layer Fire Technol 1 47-57
  • [6] Frangi A(2009)Structural analysis Springer, Dordrecht. 92 323-329
  • [7] Knobloch M(2003)Elasto-plastic model for timber-concrete composite beams with ductile connection Struct Eng Int undefined undefined-undefined
  • [8] Fontana M(2015)Fire behaviour of timber concrete composite slabs using beech Bautechnik undefined undefined-undefined
  • [9] Yeoh D(undefined)undefined undefined undefined undefined-undefined
  • [10] Fragiacomo M(undefined)undefined undefined undefined undefined-undefined