Control of vortex shedding and drag reduction through dual splitter plates attached to a square cylinder

被引:12
作者
Barman B. [1 ]
Bhattacharyya S. [2 ]
机构
[1] Department of Mathematics, University of Gour Banga, Malda
[2] Department of Mathematics, Indian Institute of Technology Kharagpur, Kharagpur
关键词
drag reduction; pressure-linked equation; semi-implicit method; splitter plate; square cylinder; vortex shedding;
D O I
10.1007/s11804-015-1299-5
中图分类号
学科分类号
摘要
In this paper we have made a numerical study on the control of vortex shedding and drag reduction of a cylinder by attaching thin splitter plates. The wake structure of the cylinder of square cross-section with attached splitter plates is analyzed for a range of Reynolds number, based on the incident stream and height of the cylinder, in the laminar range. The Navier-Stokes equations governing the flow are solved by the control volume method over a staggered grid arrangement. We have used the semi-implicit method for pressure-linked equation (SIMPLE) algorithm for computation. Our results show that the presence of a splitter plate upstream of the cylinder reduces the drag, but it has a small impact on the vortex shedding frequency when the plate length is beyond 1.5 time the height of the cylinder. The presence of a downstream splitter plate dampens the vortex shedding frequency. The entrainment of fluid into the inner side of the separated shear layers is obstructed by the downstream splitter plate. Our results suggest that by attaching in-line splitter plates both upstream and downstream of the cylinder, the vortex shedding can be suppressed, as well as a reduction in drag be obtained. We made a parametric study to determine the optimal length of these splitter plates so as to achieve low drag and low vortex shedding frequency. © 2015, Harbin Engineering University and Springer-Verlag Berlin Heidelberg.
引用
收藏
页码:138 / 145
页数:7
相关论文
共 17 条
[11]  
Ozono S., Flow control of vortex shedding by a short splitter plate asymmetrically arranged downstream of a cylinder, Physics of Fluids, 11, (1999)
[12]  
Patankar S., Numerical heat transfer and fluid flow, (1980)
[13]  
Qiu Y., Sun Y., Wu Y., Tamura Y., Effects of splitter plates and reynolds number on the aerodynamic loads acting on a circular cylinder, Journal of Wind Engineering and Industrial Aerodynamics, 127, pp. 40-50, (2014)
[14]  
Roshko A., On the wake and drag of bluff bodies, Journal of Aeronautical Science, 22, 2, (1955)
[15]  
Tiwari S., Chakraborty D., Biswas G., Panigrahi P., Numerical prediction of flow and heat transfer in a channel in the presence of a built-in circular tube with and without an integral wake splitter, International Journal of Heat and Mass Transfer, 48, 2, pp. 439-453, (2005)
[16]  
Turki S., Numerical simulation of passive control on vortex shedding behind square cylinder using splitter plate, Engineering Applications of Computational Fluid Mechanics, 2, 4, pp. 514-524, (2008)
[17]  
Zhou L., Cheng M., Hung K., Suppression of fluid force on a square cylinder by flow control, Journal of Fluids and Structures, 21, 2, pp. 151-167, (2005)