Progress on welding of high nitrogen alloyed austenitic stainless steels

被引：0

作者：

Holmberg B. ^{[1
]}

机构：

[1] AvestaPolarit,

来源：

Welding in the World | 2002年 / 46卷 / 1-2期

关键词：

Arc welding; Austenitic stainless steels; Classifying; Composition; Corrosion; Filler materials; GTA welding; High alloy steels; Mechanical properties; MMA welding; N additions; Plasma welding; Reference lists; Submerged arc welding; Weldability; Welded joints;

D O I：

10.1007/BF03266359

中图分类号：

学科分类号：

摘要：

Stainless steels are often ranked regarding the capability of their chemical composition to achieve a certain pitting resistance. This paper focuses on the weldability of nitrogen alloyed austenitic/superaustenitic stainless steels. In addition, chemical composition, corrosion and mechanical properties together with some common applications are presented. The Pitting Resistant Equivalent number PRE, shows the relative effect of Cr, Mo, N and sometimes W on the pitting corrosion resistance. Based on the PRE level, the steels are divided into three groups. For each group the following topics are covered: chemical composition; mechanical and corrosion properties; applications; weldability (general; processes; filler materials; joint properties). This review is not concerned with the 200 series (UNS S20000 series) high manganese, high nitrogen stainless steels.

引用

页码：3 / 9

页数：6

共 20 条

[11]

Woolin P., Pitting corrosion of weldments in a high chromium/nitrogen austenitic alloy

[12]

Rabensteiner G., Et al., The welding of fully austenitic stainless steels with high molybdenum contents, Welding in the World, 27, 1-2, pp. 2-13, (1989)

[13]

Ginn B.J., Effect of welding variables on the pitting resistance of autogenous welds in UNS S31254 high alloy austenitic stainless steel

[14]

Liljas M., Et al., Welding of a nitrogen enhanced superaustenitic stainless steel 1992, Applications of Stainless Steels, (1992)

[15]

Bonnefois B., Et al., New filler materials for welding high nitrogen super austenitic stainless steels, Stainless Steels, (1999)

[16]

Gross V., Et al., Welding of high nitrogen superaustenitic and superduplex stainless steels, International Conference on High Nitrogen Steels, 1998, Stockholm

[17]

Liljas M., Et al., Welding of UNS S32654 - Corrosion properties and metallurgical aspects, 12th International Corrosion Congress, 1993, Houston, Tx, (NACE)

[18]

Alfonsson E., Holmberg B., Welding of 6 Mo austenitic stainless steels with iron base filler for use in oxidising environments, ACHEMA 2000

[19]

Karlsson L., Et al., Welding of high alloyed austenitic and duplex stainless steels, Welding in the World, 39, 2, pp. 99-110, (1997)

[20]

Holmberg B., Welding of new high-molybdenum corrosion-resistant stainless steel, Stainless World, (1998)

← 1 2 →