Processing and flexural properties of surface reinforced flat pressed WPC panelsHerstellung und Biegeeigenschaften von flachgepressten WPC-Platten mit verstärkten Deckschichten

被引：0
作者：
Henrik Schmidt
Jan T. Benthien
Heiko Thoemen
机构：
[1] Hamburg University,Department of Wood Science, Mechanical Wood Technology
[2] Bern University of Applied Sciences,Department of Architecture, Wood and Civil Engineering
来源：
European Journal of Wood and Wood Products | 2013年 / 71卷 / 5期
关键词：
Shear Fracture; Tensile Fracture; Wood Flour; Flexural Property; Oriented Strand Board;
D O I：
10.1007/s00107-013-0719-y
中图分类号：
学科分类号：
摘要：
While extrusion and injection molding are the common technologies to produce wood-plastic composites (WPC), pressing may be an alternative, particularly when flat products are striven for. In this study, flat pressed WPC panels were surface-reinforced by two different types of thermoplastic face layers to improve flexural properties. The two face materials applied were a commingled fabric made of glass and polypropylene filaments (TWINTEX®) and a glass fabric reinforced polypropylene laminate (S-TEX®). Combination of face layers and WPC panels was achieved in a single and a two stage flat pressing process. Besides studying the effects of reinforcing material and number of process stages, the influence on flexural properties of the reinforced panels was identified. Unreinforced WPC panels were tested for comparison. The reinforced WPC panels exhibited greatly improved flexural properties, with MOE (MOR) values up to nearly 10,000 N/mm² (90 N/mm²).
引用
收藏
页码：591 / 597
页数：6
相关论文
共 23 条
  • [1] Albers K(1970)Festigkeitseigenschaften beplankter Holzwerkstoffe Holz-Zent bl 96 41-42
  • [2] Plath E(2012)Effects of raw materials and process parameters on the physical and mechanical properties of flat pressed WPC panels Compos Part A 43 570-576
  • [3] Benthien JT(1997)A feasibility study on boards from wood and plastic waste: bending properties, dimensional stability and recycling of the board Holz Roh-Werkst 55 13-16
  • [4] Thoemen H(1976)Constructive behavior of Gfk-wood sandwiches—comparison of experimental results with various computation, methods Holz Roh Werkst 34 155-161
  • [5] Boeglin N(2006)Selected properties of MDF and flakeboard overlaid with fiberglass mats Forest Prod J 56 142-146
  • [6] Triboulot P(2008)Mechanical properties of wood plastic composite panels made from waste fiberboard and particleboard Pol Compos 29 606-610
  • [7] Masson D(2004)Design and processing of a thermoplastic composite reinforced wood structure Polym Compos 25 119-133
  • [8] Boehme C(2007)Response of syntactic foam core sandwich structured composites to three-point bending J Sandwich Struct Mate 4 249-272
  • [9] Cai Z(2007)Flexural properties of surface reinforced wood/plastic deck board Polym Eng Sci 47 281-288
  • [10] Chaharmahali M(2008)Glass-fiber-reinforced wood/plastic composites J Vinyl Add Tech 14 39-42
123