Water Modeling of Optimizing Tundish Flow Field

被引:0
作者
LIU J.-g. [1 ]
YAN H.-c. [2 ]
LIU L. [2 ]
WANG X.-h. [3 ]
机构
[1] Shougang Research Institute of Technology, Beijing
[2] Department of Metallurgical Technology, Central Iron and Steel Research Institute, Beijing
[3] Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing
关键词
dam; flow field; tundish; turbulence inhibitor; water modeling experiment; weir;
D O I
10.1016/S1006-706X(07)60036-3
中图分类号
学科分类号
摘要
In the water modeling experiments, three cases were considered, i. e., a bare tundish, a tundish equipped with a turbulence inhibitor, and a rectangular tundish equipped with weirs (dams) and a turbulence inhibitor. Comparing the RTD curves, inclusion separation, and the result of the streamline experiment, it can be found that the tundish equipped with weirs (dams) and a turbulence inhibitor has a great effect on the flow field and the inclusion separation when compared with the sole use or no use of the turbulent inhibitor or weirs (dams). In addition, the enlargement of the distance between the weir and dam will result in a better effect when the tundish equipped with weirs (dam) and a turbulence inhibitor was used. © 2007 Central Iron and Steel Research Institute.
引用
收藏
页码:14 / 20
页数:6
相关论文
共 50 条
[41]   Fluid Flow and Mixing in Non-Isothermal Water Model of Continuous Casting Tundish [J].
Mehdi Alizadeh ;
Hossein Edris ;
Ali Shafyei .
Journal of Iron and Steel Research International, 2008, 15 :7-13
[42]   Fluid Flow and Mixing in Non-Isothermal Water Model of Continuous Casting Tundish [J].
Mehdi ALIZADEH ;
Hossein EDRIS ;
Ali SHAFYEI .
JournalofIronandSteelResearch(International), 2008, (02) :7-13+22
[43]   Numerical Simulation of Inclusion Removal in a Novel Tundish with Swirl Flow [J].
Yan, Jianchuan ;
Li, Tao ;
Liu, Jun .
10TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2019, :39-50
[44]   Effect of a swirling ladle shroud on fluid flow and mass transfer in a water model of a tundish [J].
Solorio-Díaz, G ;
Morales, RD ;
Ramos-Banderas, A .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2005, 48 (17) :3574-3590
[45]   Effect of Flow Field Optimization of an Asymmetric Multi-Strand Tundish on the Quality Consistency of Cracking Con-Rod Steel [J].
Tie, Zhanpeng ;
Tang, Haiyan ;
Wang, Kaimin ;
Miao, Hongsheng ;
Cai, Sen ;
Xian, Fenqiang ;
Zhang, Jiaquan .
MATERIALS, 2022, 15 (10)
[46]   Numerical and Physical Modeling of Liquid Steel Active Flow in Tundish with Subflux Turbulence Controller and Dam [J].
Cwudzinski, Adam .
STEEL RESEARCH INTERNATIONAL, 2014, 85 (05) :902-917
[47]   OPTIMIZING THE THERMOPHYSICAL CHARACTERISTICS OF SLAG-FORMING MIXTURES FOR A TUNDISH [J].
Lebedev, I. V. ;
Tinyakov, V. V. ;
Toptygin, A. M. ;
Anisimov, K. N. .
METALLURGIST, 2013, 57 (7-8) :690-694
[48]   Optimizing the Thermophysical Characteristics of Slag-Forming Mixtures for a Tundish [J].
I. V. Lebedev ;
V. V. Tinyakov ;
A. M. Toptygin ;
K. N. Anisimov .
Metallurgist, 2013, 57 :690-694
[49]   Fluid flow and mixing in non-isothermal water model of. continuous casting tundish [J].
Alizadeh, Mehdi ;
Edris, Hossein ;
Shafyei, Ali .
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2008, 15 (02) :7-+
[50]   EFFECT OF CASTING FLOW RATE ON STEEL FLOW PHENOMENA IN TUNDISH [J].
Merder, T. .
METALURGIJA, 2013, 52 (02) :161-164