Water Modeling of Optimizing Tundish Flow Field

被引：0
作者：
LIU J.-g. [1 ]
YAN H.-c. [2 ]
LIU L. [2 ]
WANG X.-h. [3 ]
机构：
[1] Shougang Research Institute of Technology, Beijing
[2] Department of Metallurgical Technology, Central Iron and Steel Research Institute, Beijing
[3] Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing
来源：
Journal of Iron and Steel Research International | 2007年 / 14卷 / 3期
关键词：
dam; flow field; tundish; turbulence inhibitor; water modeling experiment; weir;
D O I：
10.1016/S1006-706X(07)60036-3
中图分类号：
学科分类号：
摘要：
In the water modeling experiments, three cases were considered, i. e., a bare tundish, a tundish equipped with a turbulence inhibitor, and a rectangular tundish equipped with weirs (dams) and a turbulence inhibitor. Comparing the RTD curves, inclusion separation, and the result of the streamline experiment, it can be found that the tundish equipped with weirs (dams) and a turbulence inhibitor has a great effect on the flow field and the inclusion separation when compared with the sole use or no use of the turbulent inhibitor or weirs (dams). In addition, the enlargement of the distance between the weir and dam will result in a better effect when the tundish equipped with weirs (dam) and a turbulence inhibitor was used. © 2007 Central Iron and Steel Research Institute.
引用
收藏
页码：14 / 20
页数：6
相关论文
共 50 条
[31]   NUMERICAL MODELING OF STEEL FLOW IN A MULTI-STRAND CONTINUOUS CASTING TUNDISH [J].
Warzecha, Marek .
ACTA METALLURGICA SLOVACA, 2014, 20 (02) :140-145
[32]   Flow Field in a Continuous Casting Tundish with a Novel Single-Induction Heater [J].
Xiao, Hong ;
Zhang, Shuo ;
Liu, Jinwen ;
Wu, Guanghui ;
Yao, Haiying ;
Tang, Haiyan ;
Zhang, Jiaquan .
11TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2020, :581-593
[33]   Numerical Calculation of Fluid Flow in a Continuous Casting Tundish [J].
Li, Yang ;
Jin, Yan ;
Yu, Hui ;
Yang, Kang ;
Ai, Fan ;
Wang, Jun ;
Huang, Hongbin .
ADVANCED TECHNOLOGIES IN MANUFACTURING, ENGINEERING AND MATERIALS, PTS 1-3, 2013, 774-776 :316-+
[34]   Modeling of Liquid Steel/Slag/Argon Gas Multiphase Flow During Tundish Open Eye Formation in a Two-Strand Tundish [J].
Saikat Chatterjee ;
Donghui Li ;
Kinnor Chattopadhyay .
Metallurgical and Materials Transactions B, 2018, 49 :756-766
[35]   Modeling the effects of a swirling flow on temperature stratification of liquid steel and flotation of inclusions in a tundish [J].
Solorio-Diaz, G ;
Morales, RD ;
Palafox-Ramos, J ;
Ramos-Banderas, A .
ISIJ INTERNATIONAL, 2005, 45 (08) :1129-1137
[36]   Modeling on Characteristics of Fluid Flow in Four-Strand T-Type Tundish [J].
Liu Cheng-jun ;
Feng Wei ;
Kong Jun-qi ;
Zhang Yong-cang ;
Jiang Mao-fa .
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2010, 17 :87-90
[37]   Modeling of Fluid Flow and Residence-Time Distribution in a Five-Strand Tundish [J].
Sheng, Dong-Yuan ;
Yue, Qiang .
METALS, 2020, 10 (08) :1-17
[38]   OPTIMIZING OF STEEL FLOW IN THREE-STRAND T-TYPE TUNDISH USING MATHEMATICAL AND PHYSICAL MODELS [J].
Bulko, Branislav ;
Demeter, Peter ;
Dzurnak, Robert ;
Fogaras, Lukas ;
Hubatka, Slavomir ;
Sabik, Vladimir ;
Chomic, Vladimir ;
Ondrejkovic, Karol .
31ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, METAL 2022, 2022, :23-29
[39]   Optimizing flow patterns and residence time in a two-strand steelmaking tundish via PIV and tracer-based flow detection [J].
Mohammadi, Armin ;
Nili-Ahmadabadi, Mahdi ;
Mohammadi, Sadaf ;
Joulaei, Amir ;
Ha, Man Yeong .
METALLURGICAL RESEARCH & TECHNOLOGY, 2025, 122 (02)
[40]   Hydrodynamic Modeling and Mathematical Simulation on Flow Field and Inclusion Removal in a Seven-Strand Continuous Casting Tundish with Channel Type Induction Heating [J].
Tang, Haiyan ;
Guo, Luzhao ;
Wu, Guanghui ;
Xiao, Hong ;
Yao, Haiying ;
Zhang, Jiaquan .
METALS, 2018, 8 (06)
12345