Development of meso-scale milling machine tool and its performance analysis

被引：13

作者：

Li H. ^{[1
]}

Lai X. ^{[1
]}

Li C. ^{[1
]}

Lin Z. ^{[1
]}

Miao J. ^{[1
]}

Ni J. ^{[2
]}

机构：

[1] State Key Laboratory of Mechanical System and Vibration, Shanghai Jiaotong University

[2] Shien-Ming Wu Manufacturing Research Center, University of Michigan

来源：

Frontiers of Mechanical Engineering in China | 2008年 / 3卷 / 1期

基金：

中国国家自然科学基金;

关键词：

Meso manufacturing; Meso scale; Milling process; Miniaturized machine tool;

D O I：

10.1007/s11465-008-0005-6

中图分类号：

学科分类号：

摘要：

To overcome the shortcomings of current technologies for meso-scale manufacturing such as MEMS and ultra precision machining, this paper focuses on the investigations on the meso milling process with a miniaturized machine tool. First, the related technologies for the process mechanism studies are investigated based on the analysis of the characteristics of the meso milling process. An overview of the key issues is presented and research approaches are also proposed. Then, a mesoscale milling machine tool system is developed. The subsystems and their specifications are described in detail. Finally, some tests are conducted to evaluate the performance of the system. These tests consist of precision measurement of the positioning subsystem, the test for machining precision evaluation, and the experiments for machining mechanical parts with complex features. Through test analysis, the meso milling process with a miniaturized machine tool is proved to be feasible and applicable for meso manufacturing. © 2008 Higher Education Press and Springer-Verlag.

引用

页码：59 / 65

页数：6

共 13 条

[1]

Lu Z.N., Takeshi Y., Micro cutting in the micro lathe turning system, International Journal of Machine Tools & Manufacture, 39, pp. 1171-1183, (1999)

[2]

Liu X., Vogler M.P., Kapoor S.G., Et al., Micro-endmilling with meso-machine-tool system, NSF Design, Service and Manufacturing Grantees and Research Conference Proc, pp. 1-9, (2004)

[3]

Sun Y.Z., Liang Y.C., Cheng K., Micro scale and meso scale mechanical manufacturing, Chinese Journal of Mechanical Engineering, 40, pp. 1-6, (2004)

[4]

Zhao W.S., Lii W.Z., Wang Z.L., Research on a high precision micro EDM system, Electromachining & Mould, 1, pp. 6-9, (2004)

[5]

Kurita T., Hattori M., Development of new concept desk top size machine tool, International Journal of Machine Tool and Manufacture, 45, pp. 959-965, (2005)

[6]

Lucca D.A., Rhorer R.L., Komanduri R., Energy dissipation in the ultraprecision machining of copper, CIRP Ann, 40, pp. 69-72, (1991)

[7]

Vogler M.P., Devor R.E., Kapoor S.G., Et al., Microstructure-Level force prediction model for micro-milling of multi-phase materials, ASME Journal of Manufacturing Science and Engineering, 125, pp. 202-209, (2003)

[8]

Kim C.J., Mayor J.R., Ni J., A static model of chip formation in microscale milling, ASME Journal of Manufacturing Science and Engineering, 126, pp. 710-718, (2004)

[9]

Ikawa N., Shimsfs S., Tanaka H., Minimum thickness of cut in micromachining, Nanotechnology, 3, pp. 6-9, (1992)

[10]

Milton C.S., Metal Cutting Principles, (1984)

← 1 2 →