Effect of severe plastic deformation on the formation of the nanocrystalline structure and the aging of the multicomponent aluminum-lithium alloy with small additions of Sc and Mg

被引:0
|
作者
L. I. Kaigorodova
V. G. Pushin
D. Yu. Rasposienko
V. P. Pilyugin
机构
[1] Russian Academy of Sciences,Institute of Metal Physics, Ural Division
来源
The Physics of Metals and Metallography | 2011年 / 111卷
关键词
Severe Plastic Deformation; Dark Field Image; Artificial Aging; High Pressure Torsion; Supersaturated Solid Solution;
D O I
暂无
中图分类号
学科分类号
摘要
Effect of severe plastic deformation and subsequent low-temperature annealing on the structural and phase transformations, which are realized in the alloy 1450 on the base of the Al-Li-Cu-Zr system with additives of Sc and Mg has been studied by electron microscopy. The possibility of obtaining a nanocrystalline recrystallized structure in the alloy investigated has been established. It has been shown that its uniformity and dispersiveness depend on the degree of deformation and on the regime of annealing and are determined by the density distribution of particles that are precipitated upon the decomposition of the supersaturated solid solution. The transition of the alloy from microcrystalline to submicrocrystalline or nanocrystalline state changes its phase composition, morphology, and mechanism of nucleation of the precipitated phases and makes it possible to minimize structural factors that exert negative effect on the alloy plasticity.
引用
收藏
页码:72 / 79
页数:7
相关论文
共 50 条
  • [21] Nanostructural formation of fine grained aluminum alloy by severe plastic deformation at cryogenic temperature
    Jingou Yin
    Jian Lu
    Hongtao Ma
    Pengsheng Zhang
    Journal of Materials Science, 2004, 39 : 2851 - 2854
  • [22] Effect of Severe Plastic Deformation on Structure and Properties of Al-Sc-Ta and Al-Sc-Ti Alloys
    Berezina, Alla
    Monastyrska, Tetiana
    Davydenko, Olexandr
    Molebny, Oleh
    Polishchuk, Sergey
    NANOSCALE RESEARCH LETTERS, 2017, 12
  • [23] Structure of aging Al–Li–Cu–Zr–Sc–Ag alloy after severe plastic deformation and long-term storage
    L. I. Kaigorodova
    D. Yu. Rasposienko
    V. G. Pushin
    V. P. Pilyugin
    S. V. Smirnov
    The Physics of Metals and Metallography, 2015, 116 : 1108 - 1115
  • [24] Structure and mechanical properties of aging Al-Li-Cu-Zr-Sc-Ag alloy after severe plastic deformation by high-pressure torsion
    L. I. Kaigorodova
    D. Yu. Rasposienko
    V. G. Pushin
    V. P. Pilyugin
    S. V. Smirnov
    The Physics of Metals and Metallography, 2015, 116 : 346 - 355
  • [25] Structure and mechanical properties of aging Al-Li-Cu-Zr-Sc-Ag alloy after severe plastic deformation by high-pressure torsion
    Kaigorodova, L. I.
    Rasposienko, D. Yu.
    Pushin, V. G.
    Pilyugin, V. P.
    Smirnov, S. V.
    PHYSICS OF METALS AND METALLOGRAPHY, 2015, 116 (04) : 346 - 355
  • [26] Effect of severe plastic deformation on Thixomolded® AZ91D Mg alloy
    Li, Xiang
    Ghosh, Amit
    Decker, Ray
    MAGNESIUM TECHNOLOGY 2007, 2007, : 221 - +
  • [27] The mechanism of nanocrystalline structure formation in Ni3Al during severe plastic deformation
    Korznikov, AV
    Tram, G
    Dimitrov, O
    Korznikova, GF
    Idrisova, SR
    Pakiela, Z
    ACTA MATERIALIA, 2001, 49 (04) : 663 - 671
  • [28] Formation of nanocrystalline structure in two-phase titanium alloys by warm severe plastic deformation
    Salishchev, GA
    Murzinova, MA
    Zherebtsov, SV
    Galeyev, RM
    Valiakhmetov, OR
    ULTRAFINE GRAINED MATERIALS II, 2002, : 113 - 122
  • [29] Structure of aging Al-Li-Cu-Zr-Sc-Ag alloy after severe plastic deformation and long-term storage
    Kaigorodova, L. I.
    Rasposienko, D. Yu.
    Pushin, V. G.
    Pilyugin, V. P.
    Smirnov, S. V.
    PHYSICS OF METALS AND METALLOGRAPHY, 2015, 116 (11) : 1108 - 1115
  • [30] Structure and Mechanical Properties of Aluminum 1560 Alloy after Severe Plastic Deformation by Groove Pressing
    Moskvichev, E. N.
    Skripnyak, V. A.
    Skripnyak, V. V.
    Kozulin, A. A.
    Lychagin, D. V.
    PHYSICAL MESOMECHANICS, 2018, 21 (06) : 515 - 522