Bond strength tests on deformed reinforcement in normal weight concrete

被引:0
|
作者
P. R. Walker
M. K. Batayneh
P. E. Regan
机构
[1] Oxford Brookes University,School of Construction & Earth Sciences
[2] Dari Construction,School of Architecture & Engineering
[3] University of Westminster,undefined
来源
Materials and Structures | 1997年 / 30卷
关键词
Bond Strength; Lateral Pressure; Concrete Cover; Bond Stress; Bond Ratio;
D O I
暂无
中图分类号
学科分类号
摘要
The primary aim of the research which is described in this paper was to investigate the effect of lateral pressure on the bond strength of deformed reinforcement set in normal weight concrete. A large number of tests was undertaken in which the main variables affecting bond strength were investigated. These included concrete strength, reinforcing bar diameter, concrete cover, lateral pressure, position of casting and bar spacing. A brief review of the small number of earlier investigations involving lateral pressures is provided. The paper provides details of the test specimens, the test apparatus and procedure, as well as typical results selected from approximately three hundred results. It draws conclusions on the appropriateness of the test method and the effects of the variables on the bond stress ratio and on bond strength.
引用
收藏
页码:424 / 429
页数:5
相关论文
共 50 条
  • [41] Experimental Study on Bond Strength of Deformed Steel Bars in Recycled Glass Aggregate Concrete
    Wang, Fengchi
    Wu, Xingming
    Guo, Chao
    Song, Wen
    KSCE JOURNAL OF CIVIL ENGINEERING, 2018, 22 (09) : 3409 - 3418
  • [42] Bond strength prediction for deformed steel rebar embedded in recycled coarse aggregate concrete
    Kim, Sun-Woo
    Yun, Hyun-Do
    Park, Wan-Shin
    Jang, Young-Il
    MATERIALS & DESIGN, 2015, 83 : 257 - 269
  • [43] Bond of reinforcement in polymer concrete
    Orsolya Ilona Nemeth
    Eva Lubloy
    Gyoergy Farkas
    PERIODICA POLYTECHNICA-CIVIL ENGINEERING, 2014, 58 (02): : 137 - 141
  • [44] Bond behavior and assessment of design ultimate bond stress of normal and high strength concrete
    Diab, Ahmed M.
    Elyamany, Hafez E.
    Hussein, Mostafa A.
    Al Ashy, Hazem M.
    ALEXANDRIA ENGINEERING JOURNAL, 2014, 53 (02) : 355 - 371
  • [45] Influence of kaolin and dolomite as filler on bond strength of polyurethane coated reinforcement concrete
    Vijayaraghavan, J.
    Jeevakkumar, R.
    Venkatesan, G.
    Rengasamy, M.
    Thivya, J.
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 325
  • [46] Evaluation and modeling of ultimate bond strength of corroded reinforcement in reinforced concrete elements
    Esra Mete Güneyisi
    Kasım Mermerdaş
    Ayşegül Gültekin
    Materials and Structures, 2016, 49 : 3195 - 3215
  • [47] Experimental study on bond strength of fiber reinforced polymer rebars in normal strength concrete
    Lee, Young Hak
    Kim, Min Sook
    Kim, Heecheul
    Lee, Junbok
    Kim, Dae-Jin
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2013, 27 (5-6) : 508 - 522
  • [48] BOND STRENGTH PREDICTION MODEL OF CORRODED REINFORCEMENT IN CONCRETE USING NEURAL NETWORK
    Concha, Nolan C.
    Oreta, Andres Winston C.
    INTERNATIONAL JOURNAL OF GEOMATE, 2019, 16 (54): : 55 - 61
  • [49] Evaluation and modeling of ultimate bond strength of corroded reinforcement in reinforced concrete elements
    Guneyisi, Esra Mete
    Mermerdas, Kasim
    Gultekin, Aysegul
    MATERIALS AND STRUCTURES, 2016, 49 (08) : 3195 - 3215
  • [50] Experimental Study on Bond Strength of Deformed Steel Bars in Recycled Glass Aggregate Concrete
    Fengchi Wang
    Xingming Wu
    Chao Guo
    Wen Song
    KSCE Journal of Civil Engineering, 2018, 22 : 3409 - 3418