Bond strength tests on deformed reinforcement in normal weight concrete

被引:0
|
作者
P. R. Walker
M. K. Batayneh
P. E. Regan
机构
[1] Oxford Brookes University,School of Construction & Earth Sciences
[2] Dari Construction,School of Architecture & Engineering
[3] University of Westminster,undefined
来源
Materials and Structures | 1997年 / 30卷
关键词
Bond Strength; Lateral Pressure; Concrete Cover; Bond Stress; Bond Ratio;
D O I
暂无
中图分类号
学科分类号
摘要
The primary aim of the research which is described in this paper was to investigate the effect of lateral pressure on the bond strength of deformed reinforcement set in normal weight concrete. A large number of tests was undertaken in which the main variables affecting bond strength were investigated. These included concrete strength, reinforcing bar diameter, concrete cover, lateral pressure, position of casting and bar spacing. A brief review of the small number of earlier investigations involving lateral pressures is provided. The paper provides details of the test specimens, the test apparatus and procedure, as well as typical results selected from approximately three hundred results. It draws conclusions on the appropriateness of the test method and the effects of the variables on the bond stress ratio and on bond strength.
引用
收藏
页码:424 / 429
页数:5
相关论文
共 50 条
  • [1] Bond strength tests on deformed reinforcement in normal weight concrete
    Walker, PR
    Batayneh, MK
    Regan, PE
    MATERIALS AND STRUCTURES, 1997, 30 (201) : 424 - 429
  • [2] Confinement effects on bond strength of deformed reinforcement in early-age concrete
    Li, Wenming
    Wu, Zhimin
    Xiao, Jianzhuang
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 456
  • [3] Analytical bond strength of deformed bars in concrete confined with transverse reinforcement and FRP
    Xu, Zhenwen
    Chen, Shikun
    Qian, Hao
    Wang, Tielong
    Liu, Yi
    Yan, Dongming
    ENGINEERING STRUCTURES, 2023, 280
  • [4] Analytical model for the bond stress-slip relationship of deformed bars in normal strength concrete
    Lin, Hongwei
    Zhao, Yuxi
    Ozbolt, Josko
    Feng, Peng
    Jiang, Cheng
    Eligehausen, Rolf
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 198 : 570 - 586
  • [5] Bond Stress Model of Deformed Bars in High Strength Concrete
    Concha, Nolan
    Abad, Jefferson
    Delfino, Kristine Zophiel
    Tungcab, Mary Alleina
    Lansangan, Marjorie
    2019 IEEE 11TH INTERNATIONAL CONFERENCE ON HUMANOID, NANOTECHNOLOGY, INFORMATION TECHNOLOGY, COMMUNICATION AND CONTROL, ENVIRONMENT, AND MANAGEMENT (HNICEM), 2019,
  • [6] PROBLEMS AND NORMATIVE EVALUATION OF BOND-STRENGTH TESTS FOR COATED REINFORCEMENT AND CONCRETE
    Pokorny, Petr
    Kouril, Milan
    Stoulil, Jan
    Bouska, Petr
    Simon, Pavel
    Juranek, Pavel
    MATERIALI IN TEHNOLOGIJE, 2015, 49 (06): : 847 - 856
  • [7] Interfacial properties and bond strength model of TRC-confined concrete and deformed reinforcement under corrosion
    Yin, Shiping
    Hu, Changshun
    Lv, Henglin
    COMPOSITE INTERFACES, 2019, 26 (06) : 551 - 569
  • [8] Bond strength of deformed reinforcement embedded in steel fiber reinforced concrete: Influencing factors and prediction model
    Hou, Lijun
    Sun, Hui
    Liu, Gengsheng
    Huang, Ting
    Chen, Da
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 407
  • [9] Improving the bond strength of concrete to reinforcement by adding methylcellulose to concrete
    Fu, XL
    Chung, DDL
    ACI MATERIALS JOURNAL, 1998, 95 (05) : 601 - 608
  • [10] Influence of loading condition and reinforcement size on the concrete/reinforcement bond strength
    Turk, K
    Caliskan, S
    Yildirim, MS
    STRUCTURAL ENGINEERING AND MECHANICS, 2005, 19 (03) : 337 - 346