Fabrication of Ti3AlC2 ceramic material by mechanical alloying

被引:0
作者
Shibo Guo
Qiping Kang
Jun Liu
Xuanhui Qu
机构
[1] Hunan University of Science and Technology,College of Electromechanical Engineering
[2] University of Science and Technology Beijing,School of Materials Science and Engineering
来源
Rare Metals | 2010年 / 29卷
关键词
mechanical alloying; Ti; AlC; microstructure; mechanical properties;
D O I
暂无
中图分类号
学科分类号
摘要
Ti3AlC2 has the properties of ceramics and metals. These excellent properties indicate that Ti3AlC2 is a very promising material to extensive applications. Ti3AlC2 ceramic material was prepared by mechanical alloying. The effects of milling time and sintering temperature on the fracture, microstructure and mechanical properties of Ti3AlC2 ceramic material were analyzed by laser particle analyzer, X-ray diffraction, and scanning electron microscopy. The experimental results showed that Ti3AlC2 had the best comprehensive properties after the composite powder was milled for 3 h and sintered at 1630°C for 2 h. The relative density, bending strength, and hardness of the sample reached 92.23%, 345.2 MPa, and HRA 34.1, respectively. The fracture surface indicated that the fracture of the material belonged to ductile rapture.
引用
收藏
页码:376 / 379
页数:3
相关论文
共 50 条
  • [21] Pressureless Sintering and Properties of Ti3AlC2
    Lu, Xinpo
    Zhou, Yanchun
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2010, 7 (06) : 744 - 751
  • [22] Tribological behaviors and mechanisms of Ti3AlC2
    Zhenying Huang
    Hongxiang Zhai
    Wei Zhou
    Xin Liu
    Mingxing Ai
    Tribology Letters, 2007, 27 : 129 - 135
  • [23] Influence of Mo doping on the tribological behavior of Ti3AlC2 ceramic at different temperatures
    Fang, Yuan
    Feng, Yuxia
    Liu, Xiaohua
    Li, Chen
    Zhu, Jianfeng
    Liu, Yang
    CERAMICS INTERNATIONAL, 2021, 47 (18) : 25520 - 25530
  • [24] Effects of Ti3AlC2 Content on Cu/Ti3AlC2 Composites by Hot Pressing Method
    Huang Zhenying
    Zhai Hongxiang
    Li Mengqi
    Liu Xiu
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 : 529 - 532
  • [25] Mechanical and oxidation behavior of textured Ti2AlC and Ti3AlC2 MAX phase materials
    Li, Xiaoqiang
    Xie, Xi
    Gonzalez-Julian, Jesus
    Malzbender, Juergen
    Yang, Rui
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2020, 40 (15) : 5258 - 5271
  • [26] On the interactions of Ti2AlC, Ti3AlC2, Ti3SiC2 and Cr2AlC with palladium at 900 °C
    Bentzel, G. W.
    Sokol, M.
    Griggs, J.
    Lang, A. C.
    Barsoum, M. W.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 771 : 1103 - 1110
  • [27] Microstructural and Mechanical Properties of TiCX–Ni3(Al,Ti)/Ni Functionally Graded Composites Fabricated from Ti3AlC2 and Ni Powders
    Guangming Zheng
    Zhenying Huang
    Qun Yu
    Wenqiang Hu
    Xingyang Qiu
    A. Lixia
    Yuanbo Wang
    Yidan Jiao
    Yang Zhou
    Hongxiang Zhai
    Metals and Materials International, 2020, 26 : 905 - 913
  • [28] Anisotropic arc erosion resistance of Ag/Ti3AlC2 composites induced by the alignment of Ti3AlC2
    Wang, Dan Dan
    Tian, Wu Bian
    Ding, Jian Xiang
    Ma, Ai Bin
    Zhu, Yong Fa
    Zhang, Pei Gen
    He, Wei
    Sun, Zheng Ming
    CORROSION SCIENCE, 2020, 171
  • [29] Fabrication of high-purity ternary carbide Ti3AlC2 by spark plasma sintering (SPS) technique
    Jinghong Song
    Haitao Yang
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2008, 23 : 177 - 180
  • [30] Effect of Ti3AlC2 Content on Electrical Friction and Wear Behaviors of Cu–Ti3AlC2 Composites
    Hao Zhao
    Yi Feng
    Gang Qian
    Xiaochen Huang
    Shenshen Guo
    Xiaoyan Sun
    Tribology Letters, 2019, 67