Influence of Carbon Nano fibre Addition on Mechanical Behaviour of PLA Based 3D Printed Polymer Nano composites

被引：0

作者：

Kumar N.H. ^{[1
]}

Adarsha H. ^{[2
]}

Keshavamurthy R. ^{[3
]}

Kapilan N. ^{[1
]}

机构：

[1] Department of Mechanical Engineering, Nitte Meenakshi Institute of Technology, Karnataka, Bangalore

[2] Department of Mechanical Engineering, Jain University, Bangalore

[3] Department of Mechanical Engineering, Dayananda Sagar College of Engineering, Karnataka, Bangalore

来源：

Journal of The Institution of Engineers (India): Series D | 2024年 / 105卷 / 01期

关键词：

Carbon nano fiber; Mechanical properties; PLA; Polymer nano composites;

D O I：

10.1007/s40033-023-00455-0

中图分类号：

学科分类号：

摘要：

This study investigates the mechanical properties of carbon nanofiber-reinforced polymer matrix composites produced by Fused Deposition Modelling (FDM). Poly Lactic Acid (PLA) and carbon nanofiber were combined at the following weight percentages: 0%, 1%, 2%, and 3%. The method of twin screw extrusion was utilised in the making of FDM-compatible composite filaments. The tensile properties of virgin PLA and PLA combined with carbon nanofiber were evaluated. It was discovered that adding carbon nanofiber significantly increased the material's tensile strength. The key to achieving the desirable properties observed here was the uniform distribution of carbon nanofibers throughout the PLA matrix. The mechanisms underlying the enhancement of the mechanical properties of PLA/carbon nanofiber composites have been thoroughly investigated. The addition of 3% carbon nanofibers to PLA increased the material's tensile strength by 23.3%, its yield strength by 20%, and decreased its elongation by 38.1%. © The Institution of Engineers (India) 2023.

引用

页码：33 / 47

页数：14

共 45 条

[21]

Lin D., Jin S., Zhang F., Et al., 3D stereolithography printing of graphene oxide reinforced complex architectures, Nanotechnology, 26, (2015)

[22]

Sandoval H., Wicker R.B., Functionalizing stereolithography resins: effects of dispersed multi-walled carbon nanotubes on physical properties, Rapid Prototyp J, 12, pp. 292-303, (2006)

[23]

Wei X., Li D., Jiang W., Et al., 3D Printable graphene composite, Nat. Sci. Rep, 5, 1, pp. 1-7, (2015)

[24]

Weng Z., Wang J., Senthil T., Et al., Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing, Mater Des, 102, pp. 276-283, (2016)

[25]

Tambrallimath V., Keshavamurthy R., Saravanbavan D., Pradeep Kumar G.S., Harish Kumar M., Synthesis and characterization of graphene filled PC-ABS filament for FDM applications, AIP Conference Proceedings, 2057, 20039, (2019)

[26]

Bilkar D., Keshavamurthy R., Tambrallimath V., Influence of carbon nanofiber reinforcement on mechanical properties of polymer composites developed by FDM, Materials Today Proceedings, 46, 10, pp. 4559-4562, (2021)

[27]

Maqsood N., Rimasauskas M., Delamination observation occurred during the flexural bending in additively manufactured PLA-short carbon fiber filament reinforced with continuous carbon fiber composite, Results Eng, 11, (2021)

[28]

Frenkel J., Viscous flow of crystalline bodies under the action of surface tension, J. Phys, 9, (1945)

[29]

Bellehumeur C., Li L., Sun Q., Gu P., Modeling of bond formation between polymer filaments in the fused deposition modeling process, J. Manuf. Process, 6, pp. 170-178, (2004)

[30]

Mayhew E., Prakash V., Thermal conductivity of individual carbon nanofibers, Carbon, 62, pp. 493-500, (2013)

← 1 2 3 4 5 →