Influence of Carbon Nano fibre Addition on Mechanical Behaviour of PLA Based 3D Printed Polymer Nano composites

被引：0

作者：

Kumar N.H. ^{[1
]}

Adarsha H. ^{[2
]}

Keshavamurthy R. ^{[3
]}

Kapilan N. ^{[1
]}

机构：

[1] Department of Mechanical Engineering, Nitte Meenakshi Institute of Technology, Karnataka, Bangalore

[2] Department of Mechanical Engineering, Jain University, Bangalore

[3] Department of Mechanical Engineering, Dayananda Sagar College of Engineering, Karnataka, Bangalore

来源：

Journal of The Institution of Engineers (India): Series D | 2024年 / 105卷 / 01期

关键词：

Carbon nano fiber; Mechanical properties; PLA; Polymer nano composites;

D O I：

10.1007/s40033-023-00455-0

中图分类号：

学科分类号：

摘要：

This study investigates the mechanical properties of carbon nanofiber-reinforced polymer matrix composites produced by Fused Deposition Modelling (FDM). Poly Lactic Acid (PLA) and carbon nanofiber were combined at the following weight percentages: 0%, 1%, 2%, and 3%. The method of twin screw extrusion was utilised in the making of FDM-compatible composite filaments. The tensile properties of virgin PLA and PLA combined with carbon nanofiber were evaluated. It was discovered that adding carbon nanofiber significantly increased the material's tensile strength. The key to achieving the desirable properties observed here was the uniform distribution of carbon nanofibers throughout the PLA matrix. The mechanisms underlying the enhancement of the mechanical properties of PLA/carbon nanofiber composites have been thoroughly investigated. The addition of 3% carbon nanofibers to PLA increased the material's tensile strength by 23.3%, its yield strength by 20%, and decreased its elongation by 38.1%. © The Institution of Engineers (India) 2023.

引用

页码：33 / 47

页数：14

共 45 条

[11]

Sutradhar A., Park J., Carrau D., Miller M.J., Experimental validation of 3D printed patient-specific implants using digital image correlation and finite element analysis, Comput. Biol. Med, 52, pp. 8-17, (2014)

[12]

Cesaretti G., Dini E., De Kestelier X., Colla V., Pambaguian L., Building components for an outpost on the Lunar soil by means of a novel 3D printing technology, Acta Astronaut, 93, pp. 430-450, (2014)

[13]

Gibson I., Rosen D., Stucker Additive Manufacturing Technologies B., Springer, Second Edition, ISBN 9781493921126, (2010)

[14]

Dul S., Fambri L., Pegoretti A., Filaments production and fused deposition modelling of ABS/carbon nanotubes composites, Nanomaterials, 8, 1, (2018)

[15]

Prashantha K., Roger F., Multifunctional properties of 3D printed poly (lactic acid)/graphene nanocomposites by fused deposition modelling, J. Macromol. Sci. Part A, 54, 1, pp. 24-29, (2017)

[16]

Melenka G., Cheung B., Schofield J., Dawson M., Carey J., Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures, Compos. Struct, 153, pp. 866-875, (2016)

[17]

Perez A.R.T., Roberson D.A., Wicker R.B., Fracture surface analysis of 3D-printed tensile specimens of novel ABS- based materials, J. Fail. Anal. Prev, 14, pp. 343-353, (2014)

[18]

Francis V., Jain P.K., Experimental investigations on fused deposition modelling of polymer-layered silicate nano composite, Virtual Phys. Prototyp, 11, 2, pp. 109-121, (2016)

[19]

Aw Y.Y., Yeoh C.K., Idris M.A., Amali H.K., Aqzna S.S., The P.L., A study of tensile and thermal properties of 3D printed conductive ABS – ZnO composite, AIP Conf. Proc, 1835, (2017)

[20]

Yamamoto B.E., Trimble A.Z., Minei B., GhasemiNejhad M.N., Development of multifunctional nanocomposites with 3-D printing additive manufacturing and low graphene loading, J. Thermoplast. Compos. Mater, 32, 3, pp. 383-408, (2018)

← 1 2 3 4 5 →