Effect of Sr on the Microstructure of Electromagnetically Stirred Semi-solid Hypoeutectic Al–Si Alloys

被引：0
作者：
G. Eisaabadi
A. Nouri
机构：
[1] Arak University,Department of Materials Science and Engineering, Faculty of Engineering
来源：
International Journal of Metalcasting | 2018年 / 12卷
关键词：
electromagnetic stirring; semi-solid; Al–Si alloys; modification; cooling curve;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The present study investigated the effects of Sr addition on the microstructure of semi-solid Al A356 alloy during electromagnetic stirring. Different amounts of Sr (0–350 ppm) were added to the alloy, and the effect of Sr on eutectic nucleation and growth temperature of the eutectic silicon phase was determined. The results indicate that the addition of the Sr up to 90 ppm increased the solidification range (TL–TS) of the alloy and the further addition of Sr decreased the value of TL–TS. Image analysis revealed that increasing of Sr up to 90 ppm increased the globularity (roundness) of primary aluminum particles. However, the further addition of the Sr reduced the roundness of particles. Also, it was found that the addition of Sr in all amounts increased the area percentage of primary aluminum particles compared to the non-modified alloy. The mechanisms for changes in TL–TS, roundness and area percentage of primary aluminum phase are also discussed.
引用
收藏
页码：292 / 297
页数：5
相关论文
共 50 条
[41]   Effects of semi-solid thermomechanical processing on microstructure and mechanical properties of Al 2024 [J].
Negini, Hamzeh ;
Rezaei, Amin ;
Hajisafari, Mahmoud ;
Momeni, Hossein .
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (05) :1201-1209
[42]   Modification of hypoeutectic Al-Si alloys with scandium [J].
Prukkanon, Wattanachai ;
Srisukhumbowornchai, Nakorn ;
Limmaneevichitr, Chaowalit .
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 477 (1-2) :454-460
[43]   Microstructure evolution of semi-solid Mg-14Al-0.5Mn alloys during isothermal heat treatment [J].
张亮 ;
曹占义 ;
刘勇兵 .
TransactionsofNonferrousMetalsSocietyofChina, 2010, 20 (07) :1244-1248
[44]   Microstructure evolution of semi-solid Mg-14Al-0.5Mn alloys during isothermal heat treatment [J].
Zhang Liang ;
Cao Zhan-yi ;
Liu Yong-bing .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 (07) :1244-1248
[45]   Eutectic nucleation in hypoeutectic Al-Si alloys [J].
Nafisi, S. ;
Ghomashchi, R. ;
Vali, H. .
MATERIALS CHARACTERIZATION, 2008, 59 (10) :1466-1473
[46]   Effect of Electromagnetic Stirring on Fabrication of Al-Si Semi-Solid Slurry by the Cup Cast Method [J].
SHIMASAKI Shin-ichi ;
TAKADO Yuki ;
TANIGUCHI Shoji .
Journal of Iron and Steel Research(International), 2012, (S1) :191-194
[47]   Effect of Semi-solid Isothermal Heat Treatment on Microstructure of 7075 Alloy [J].
Zhu C. ;
Luo Z.-M. ;
Wang R. ;
Zhao Z.-H. .
Dongbei Daxue Xuebao/Journal of Northeastern University, 2018, 39 (12) :1723-1726
[48]   Research on Effect of La on Microstructure in Semi-solid A356 Alloy [J].
Liu, Xiao Mei ;
Liu, Zheng ;
Hu, Yong Mei .
MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 :693-+
[49]   Investigation of the microstructure of rolled semi-solid steel [J].
Song, RB ;
Kang, YL ;
Sun, JL ;
Yang, XF ;
Zhao, AM ;
Mao, WM .
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2002, 18 (03) :281-282
[50]   Investigation of the Microstructure of Rolled Semi-Solid Steel [J].
Renbo SONG Yonglin KANG Jianlin SUN Xiongfei YANG Aimin ZHAO and Weimin MAODepartment of Metal Forming University of Science and Technology Beijing Beijing China Manuscript received March in revised form May L .
Journal of Materials Science & Technology, 2002, (03) :281-282
12345