Effect of Sr on the Microstructure of Electromagnetically Stirred Semi-solid Hypoeutectic Al–Si Alloys

被引:0
|
作者
G. Eisaabadi
A. Nouri
机构
[1] Arak University,Department of Materials Science and Engineering, Faculty of Engineering
来源
International Journal of Metalcasting | 2018年 / 12卷
关键词
electromagnetic stirring; semi-solid; Al–Si alloys; modification; cooling curve;
D O I
暂无
中图分类号
学科分类号
摘要
The present study investigated the effects of Sr addition on the microstructure of semi-solid Al A356 alloy during electromagnetic stirring. Different amounts of Sr (0–350 ppm) were added to the alloy, and the effect of Sr on eutectic nucleation and growth temperature of the eutectic silicon phase was determined. The results indicate that the addition of the Sr up to 90 ppm increased the solidification range (TL–TS) of the alloy and the further addition of Sr decreased the value of TL–TS. Image analysis revealed that increasing of Sr up to 90 ppm increased the globularity (roundness) of primary aluminum particles. However, the further addition of the Sr reduced the roundness of particles. Also, it was found that the addition of Sr in all amounts increased the area percentage of primary aluminum particles compared to the non-modified alloy. The mechanisms for changes in TL–TS, roundness and area percentage of primary aluminum phase are also discussed.
引用
收藏
页码:292 / 297
页数:5
相关论文
共 50 条
  • [21] Microstructure and properties of semi-solid formed Al-Si-Fe alloy
    Zhao, Shu-Guo
    Yuan, Xiao-Guang
    Li, Sheng
    Yu, Hai-Peng
    Cailiao Gongcheng/Journal of Materials Engineering, 2007, (02): : 34 - 38
  • [22] Semi-solid behavior of new Al-Si-Mg alloys for thixoforming
    Paes, A
    Zoqui, EJ
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 406 (1-2): : 63 - 73
  • [23] Semi-solid processing of Al and Mg alloys
    Shehata, MT
    Zoqui, EJ
    Kao, V
    Essadiqi, E
    Materials in the Automotive Industry, 2001, : 207 - 223
  • [24] Semi-solid deformation of 2014 Al alloys
    Han, DS
    Durrant, G
    Cantor, B
    5TH INTERNATIONAL CONFERENCE ON SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES, PROCEEDINGS, 1998, : 43 - 50
  • [25] Barothermography and microstructure of the hypoeutectic and eutectic alloys in Al–Si system
    Elena Dediaeva
    Anatol Padalko
    Torgom Akopyan
    Alexei Suchkov
    Vladimir Fedotov
    Journal of Thermal Analysis and Calorimetry, 2015, 121 : 485 - 490
  • [26] The effect of Sn additions on the semi-solid microstructure of an Al-7Si-0.3Mg alloy
    Kliauga, AM
    Ferrante, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 337 (1-2): : 67 - 72
  • [27] Effect of yttrium on the microstructure of a semi-solid A356 Al alloy
    LIU Zheng and HU Yongmei Faculty of Material and Chemical Engineering
    RareMetals, 2008, (05) : 536 - 540
  • [28] Effect of yttrium on the microstructure of a semi-solid A356 Al alloy
    Liu Zheng
    Hu Yongmei
    RARE METALS, 2008, 27 (05) : 536 - 540
  • [29] Degassing effect of ultrasonic vibration in molten melt and semi-solid slurry of Al-Si alloys
    Wu Shusen Liu Longfei Ma Qianqian Mao Youwu and An Ping State Key Lab of Materials Processing and Die Mould Technology Huazhong University of Science and Technology Wuhan China
    China Foundry, 2012, 9 (03) : 201 - 206
  • [30] Degassing effect of ultrasonic vibration in molten melt and semi-solid slurry of Al-Si alloys
    Wu Shusen
    Liu Longfei
    Ma Qianqian
    Mao Youwu
    An Ping
    CHINA FOUNDRY, 2012, 9 (03) : 201 - 206