Assessing the Effectiveness of Solid Lubricants

被引：1

作者：

Panaioti V.A. ^{[1
]}

Asadova Y.S. ^{[1
]}

Nemenko M.V. ^{[1
]}

机构：

[1] Moscow Technological University (MIREA), Moscow

来源：

Russian Engineering Research | 2018年 / 38卷 / 6期

关键词：

abrasive cutting coefficient; alloying coefficient; boron-nitride wheel; frictional coefficient; high-speed steel; solid lubricant;

D O I：

10.3103/S1068798X1806014X

中图分类号：

学科分类号：

摘要：

The effectiveness of a proposed solid lubricant is investigated, on the basis of the abrasive cutting coefficients. Its dependence on the grinding conditions, the characteristics of the boron-nitride wheel, and the alloying of high-speed steel is determined. The lubricant reduces the abrasive cutting coefficient by about 40–50%. A method is proposed for measuring the frictional coefficient. The benefits of lubricant application are assessed. The utility of the abrasive cutting coefficient in estimating the effectiveness of solid lubricant is confirmed. © 2018, Allerton Press, Inc.

引用

页码：493 / 497

页数：4

共 13 条

[1]

Vereshchagin A.S., Voznyakovskii A.P., Grigor'eva T.F., Et al., Progressivnye mashinostroeitel’nye tekhnologii, oborudovanie i instrumenty. Kollektivnaya monografiya, 5, pp. 228-264, (2015)

[2]

Panaioti V.A., Improvement of efficiency and quality in grinding of rapid tool steels using solid lubricants, Fundam. Prikl. Probl. Tekhn. Tekhnol., 2, 316, pp. 87-91, (2016)

[3]

Panaioti V.A., Influence of solid lubricants on surface reinforcing of tools from rapid tool steel during turning, Vestn. Bryansk. Gos. Tekh. Univ., 2, 50, pp. 41-45, (2016)

[4]

Panaioti V.A., Influence of solid lubricants on phase composition of grinding surface of rapid tool steels, Trudy IV mezhdunarodnoi konferentsii “Fundamental’nye issledovaniya i innovatsionnye tekhnologii v mashinostroenii, pp. 189-190, (2015)

[5]

Panaioti V.A., Applying solid lubricant to the grinding wheel surface, Russ. Eng. Res., 37, 4, pp. 359-362, (2017)

[6]

Kushnir A.P., Simulation of the passage of a solid through an obstacle, Ross. Tekhnol. Zh., 2, 9, pp. 116-126, (2015)

[7]

Panaioti V.A., Evaluation of the lubricity of a solid lubricant by the specific grinding work, Materialy VII mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Naukoemkie tekhnologii na sovremennom etape razvitiya mashinostroeniya, pp. 160-161, (2016)

[8]

Panaioti V.A., Evaluation of lubricating ability of solid materials by coefficient of abrasive cutting, Materialy XI mezhdunarodnoi nauchno-tekhnicheskoi konferentsii posvyashchennoi 100-letiyu so dnya rozhdeniya prof. R.M. Matveevskogo “Tribologiya mashinostroeniyu, pp. 187-188, (2016)

[9]

Panaioti V.A., Evaluation of the lubricity of a solid lubricant for the specific grinding work, Materialy VII mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Naukoemkie tekhnologii na sovremennom etape razvitiya mashinostroeniya, pp. 160-161, (2016)

[10]

Panaioti V.A., The relief geometry of the cutting surface of the cubic boron-nitride abrasive wheels in grinding with solid lubrication, Fundam. Prikl. Probl. Tekhn. Tekhnol., 1, 315, pp. 67-71, (2016)

← 1 2 →