Numerical study on cooling performance of a ventilated Trombe wall with phase change materials

被引:0
作者
Xiaohong Liu
Yuekuan Zhou
Guoqiang Zhang
机构
[1] Hunan University,College of Architecture
[2] Hunan University,College of Civil Engineering
[3] Hunan University,National Center for International Research Collaboration in Building Safety and Environment
[4] The Hong Kong Polytechnic University,Department of Building Services Engineering, Faculty of Construction and Environment
[5] Hunan University Design Institute Co.,undefined
[6] LTD,undefined
来源
Building Simulation | 2018年 / 11卷
关键词
phase change material; Trombe wall; ventilation; cooling energy storage; high-reflective coating;
D O I
暂无
中图分类号
学科分类号
摘要
This study aims to evaluate thermal performance of a new ventilated Trombe wall integrated with phase change materials (PCMs-VTW). Double PCM wallboards are embedded in the building facade for different purposes, i.e. exterior PCM wallboard is to store natural cooling energy via night-time ventilation, and interior active PCM wallboard is for radiant cooling. Melting temperature and latent heat of PCM have been discussed for PCMs-VTW system from 1st August to 7th August in Changsha, China. Also, high-reflective coating is coated on the exterior PCM wallboard for reflecting solar radiation, thus ameliorating daytime overheating. Nighttime ventilation is for natural cooling energy storage via regenerating solid exterior PCM wallboard. The obtained result shows that under the weather condition in Changsha, melting temperature 22 °C for interior PCM and the latent heat 176 kJ/kg for exterior PCM show considerable benefit for cooling energy release. Compared with the classical Trombe wall system, annual cooling energy consumption is decreased by 20.8% and by 18.6% in the PCMs-VTW system when indoor air temperature is kept at 22 °C and 24 °C respectively. Our research has provided scientific evidences for potentials provided by PCMs-VTW system in reducing building energy consumption and improving indoor thermal comfort via exploiting natural cooling energy, mitigating overheating at summer condition and utilizing cold sources in high temperature.
引用
收藏
页码:677 / 694
页数:17
相关论文
共 180 条
[1]  
Baldinelli G(2009)Double skin facades for warm climate regions: Analysis of a solution with an integrated movable shading system Building and Environment 44 1107-1118
[2]  
Bellos E(2016)An innovative Trombe wall as a passive heating system for a building in Athens—A comparison with the conventional Trombe wall and the insulated wall Energy and Buildings 133 754-769
[3]  
Tzivanidis C(2015)Compact PCM-based thermal stores for shifting peak cooling loads Building Simulation 8 673-688
[4]  
Zisopoulou E(2011)Thermal testing and numerical simulation of gypsum wallboards incorporated with different PCMs content Applied Energy 88 930-937
[5]  
Mitsopoulos G(2014)Impact of simulation time-resolution on the matching of PV production and household electric demand Applied Energy 128 192-208
[6]  
Antonopoulos KA(2015)Matching indices taking the dynamic hybrid electrical and thermal grids information into account for the decision-making of nZEB on-site renewable energy systems Energy Conversion and Management 101 423-441
[7]  
Bourne S(2006)Shading effects on the winter thermal performance of the Trombe wall air gap: An experimental study in Dalian Renewable Energy 31 1961-1971
[8]  
Novoselac A(2013)Numerical study on the thermal performance of a ventilated facade with PCM Applied Thermal Engineering 61 372-380
[9]  
Borreguero AM(2016)Match performance analysis for a solar-driven energy system in net zero energy building Energy Procedia 88 394-400
[10]  
Sánchez ML(2012)Trombe walls for lightweight buildings in temperate and hot climates. Exploring the use of phase-change materials for performances improvement Energy Procedia 30 1110-1119