The Effect of Copper and Zinc Coatings on the Properties of Carbon Fibers and Composites Based on Them

被引：0

作者：

Nelyub V.A. ^{[1
]}

机构：

[1] Bauman State Technical University, Moscow

来源：

Polymer Science, Series D | 2021年 / 14卷 / 2期

基金：

俄罗斯基础研究基金会;

关键词：

copper and zinc coatings; elementary carbon fiber; magnetron sputtering;

D O I：

10.1134/S1995421221020258

中图分类号：

学科分类号：

摘要：

Abstract: The surface of a unidirectional carbon tape has been coated by two types of metal coatings (copper and zinc) by a magnetron sputtering technique. The strength of elementary carbon fibers with these metal coatings and interlaminar shear strength of carbon plastics based on them are evaluated. The carbon plastics with epoxy binder are produced via a vacuum infusion technique. It is found that copper coating allows one to increase strength of elementary fibers on 15–22% and leads to similar rise in interlaminar shear strength of carbon plastics. To the contrary, zinc coating deteriorates strength of the elementary carbon fibers and composites based on them. The results of structural analysis of the elementary carbon fibers with metal coatings are given, and their thicknesses after long-term storage of the metallized carbon tapes are determined. © 2021, Pleiades Publishing, Ltd.

引用

页码：260 / 264

页数：4

共 15 条

[1]

(2010)

[2]

Baurova N.I., Zorin V.A., The Use of Polymer Composite Materials in the Production and Repair of Machines: Handbook, (2016)

[3]

(1997)

[4]

Baurova N.I., Microstructucal investigations of surfaces of destruction of carbon plastic, Polym. Sci., Ser. D, 6, 3, pp. 246-249, (2013)

[5]

Kobets L.P., Malysheva G.V., Borodulin A.S., Rheological properties of system ‘elastomer binder–discrete carbon fiber, Inorg. Mater.: Appl. Res., 7, 1, pp. 15-19, (2016)

[6]

A study of the effect of network angle of fabrics on kinetics of impregnation upon molding of articles made from carbon plastics, Polym. Sci., Ser. D, 9, 4, pp. 407-410, (2016)

[7]

Kondrashov S.V., Shashnev K.A., Popkov O.V., Promising technologies for obtaining functional materials for structural purposes based on nanocomposites with CNT (review),” Tr, VIAM, No., 3, (2016)

[8]

Kondrashov S.V., Shashnev K.A., Petrova G.N., Polymer composite materials for structural purposes with functional properties, Aviats. Mater. Tekhnol., pp. 405-419, (2017)

[9]

Nelyub V.A., Berlin A.A., Features of forming parts from carbon plastics when using carbon tapes with metal coatings,” Khim. Prom-st, Segodnya, No., 2, pp. 36-42, (2019)

[10]

Berlin E.V., Seidman L.A., Ion-Plasma Processes in Thin-Film Technology, (2010)

← 1 2 →