Failure analysis of a high-temperature thermocouple

A solid oxide fuel cell unit operates at high temperatures of 700 to 800 °C. The operation of the unit is controlled by a set of instrumentation including sensors, thermocouples, and voltage leads. Two S-thermocouples were inserted in the after-burner where temperature is constantly at 1000 °C. During operation of one prototype unit and after 1000 h, the thermocouples started to give erratic readings and led to complete shutdown of the unit. Analysis of the thermocouples revealed a series of events may have occurred due to stress induced by the design, materials and operating conditions, contamination during manufacturing, or a reducing environment caused by sheathing. The specification from S-type to B-type may remove the risk of reoccurrence. A design change in platinum burner thermocouples to ensure an oxygen-rich environment for the platinum was also recommended. © ASM International.