Weldability and toughness assessment of Ti-microalloyed offshore steel

被引：0
作者：
I. Rak
V. Gliha
M. Koçak
机构：
[1] University of Maribor,the Faculty of Mechanical Engineering
[2] the GKSS Research Center Geesthacht,undefined
来源：
Metallurgical and Materials Transactions A | 1997年 / 28卷
关键词：
Ferrite; Weld Metal; Acicular Ferrite; High Heat Input Weld; Ferrite Side Plate;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The present study has been carried out to investigate the coarse-grained heat-affected zone (CGHAZ) microstructure and crack tip opening displacement (CTOD) toughness of grade StE 355 Ti-microalloyed offshore steels. Three parent plates (40-mm thick) were studied, two of which had Ti microalloying with either Nb + V or Nb also present. As a third steel, conventional StE 355 steel without Ti addition was welded for comparison purposes. Multipass tandem submerged arc weld (SAW) and manual metal arc weld (SMAW) welds were produced. Different heat-affected zone (HAZ) microstructures were simulated to ascertain the detrimental effect of welding on toughness. All HAZ microstructures were examined using optical and electron microscopy. It can be concluded that Ti addition with appropriate steel processing, which disperses fine TiN precipitates uniformly, with a fine balance of other microalloying elements and with a Ti/N weight ratio of about 2.2, is beneficial for HAZ properties of StE 355 grade steel.
引用
收藏
页码：199 / 206
页数：7
相关论文
共 50 条
[11]   Microstructure and toughness of the CGHAZ of an offshore platform steel [J].
Zhou, Yanlei ;
Jia, Tao ;
Zhang, Xiangjun ;
Liu, Zhenyu ;
Misra, R. D. K. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 219 :314-320
[12]   Effect of microstructure on low-temperature toughness of a low carbon Nb-V-Ti microalloyed pipeline steel [J].
Wang, Bingxin ;
Lian, Jingbao .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 592 :50-56
[13]   Study on the impact toughness and crack propagation behavior of Ti microalloyed weathering steel laser-MAG hybrid welded joints [J].
Li, Haizhou ;
Wang, Dirui ;
Wang, Wantong ;
Lu, Rui ;
Fang, Qiang ;
Wang, Chuangwei ;
Li, Zhengrong ;
Zeng, Han ;
Chen, Hui .
ENGINEERING FAILURE ANALYSIS, 2025, 167
[14]   Influence of Cold-Wire Submerged Arc Welding on the Toughness of Microalloyed Steel [J].
Mohammad, M. ;
Collins, L. ;
Lazor, R. ;
Henein, H. ;
Ivey, D. G. .
WELDING JOURNAL, 2018, 97 (12) :338S-352S
[15]   Static and dynamic fracture toughness of a medium carbon microalloyed steel of three different microstructures [J].
S. Sankaran ;
G. Malakondaiah ;
S. Gouthama ;
K. A. Sangal .
Metallurgical and Materials Transactions A, 2006, 37 :1191-1200
[16]   Effects of Microstructure on CVN Impact Toughness in Thermomechanically Processed High Strength Microalloyed Steel [J].
Tao Jia ;
Yanlei Zhou ;
Xiaoxiao Jia ;
Zhaodong Wang .
Metallurgical and Materials Transactions A, 2017, 48 :685-696
[17]   Microstructure and Properties of a Low Carbon Ti-V Microalloyed Steel [J].
Pei Xinhua ;
Liu Zhenyu ;
Wei Jiao ;
Liu Xuefeng ;
Jia Tao ;
Hu Hengfa .
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2018, 33 (06) :1491-1495
[18]   In situ observation of austenite grain growth behavior in the simulated coarse-grained heat-affected zone of Ti-microalloyed steels [J].
Wan, Xiang-liang ;
Wu, Kai-ming ;
Huang, Gang ;
Wei, Ran ;
Cheng, Lin .
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2014, 21 (09) :878-885
[19]   Effect of boron treatment on the microstructure and toughness of Ti-containing steel weld metals [J].
Cui, Zhan-Hang ;
Wang, Bing-Xin .
REVISTA DE METALURGIA, 2022, 58 (03)
[20]   Microstructural characteristics and impact toughness in YS690MPa steel weld metal for offshore structures [J].
Wang, H. H. ;
Li, G. Q. ;
Wan, X. L. ;
Wang, H. H. ;
Nune, K. C. ;
Li, Y. ;
Wu, K. M. .
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2017, 22 (02) :133-142
12345